摘要
目前国内烧结生产的主流工艺为厚料层烧结,对烧结矿产质量指标改善、降低能耗和减少CO_(2)的排放有着显著的作用。酒钢3#烧结机也在积极探索厚料层烧结工艺,最终通过一系列工艺改进将酒钢3#烧结机料层高度从720mm提高至860mm,料层高度提高后烧结矿转鼓强度提高7.08%,返矿率降低了0.53%,利用系数提高至1.55t(m^(2)·h)以上,固体燃耗降低至57.64kg/t。
Al present,the main process of sintering production in China is thick layer sintering,which plays a significant role in improving the quality index of sintered minerals,reducing energy consumption and reducing CO_(2)emissions.Finally,through a series of process improvements,the material layer height of the 3#sintering machine was increased from 720 mm to 860 mm.After the material layer height was increased,the sinter drum strength was increased by 7.08%,the ore return rate was reduced by 0.53%,and the utilization coefficient was increased to more than 1.55/(m^(2).h),solid burn-up was reduced to 57.64 kg/t.
作者
保善山
王立满
邵勇
王忠有
申振国
BAO Shanshan;WANG Liman;Shao Yong;WANG Zhongyou;SHEN Zhenguo(Gansu Jiu Steel Group Hongxing Iron&Steel Co.Ld.,Ironmaking Plant,Jiayuguan 735100,China)
出处
《甘肃冶金》
2024年第2期21-24,共4页
Gansu Metallurgy
关键词
厚料层烧结
漏风率
烧结矿
转鼓指标
混合料
thick layer sintering
air leakage rate
sinter ore
drum indicator
admixture