基于ANSYS的刮板输送机C形槽结构研究

Research on Structure of C-groove of Scraper Conveyor Based on ANSYS

针对刮板输送机中部槽中板更换、维修周期长的问题,提出新型C形槽中部槽结构。以SGZ1000/1400型刮板输送机为例,采用ANSYS数值模拟软件对刮板输送机C形槽中部槽进行受力模拟分析,验证该结构在额定工况下使用的可靠性,并对薄弱部位提出相应改进方案。

In response to the problem of long replacement and maintenance cycles for the middle groove of the scraper conveyor,a new C-groove middle groove structure was proposed.Taking the type of SGZ1000/1400 scraper conveyor as an example,ANSYS numerical simulation software was used to simulate and analyze the stress on the C-groove middle groove of the scraper conveyor.The reliability of the structure under rated conditions was verified,and corresponding improvement plan were proposed for weak areas.