摘要
钢铁行业的大部分能源计量器具在安装调试完毕投入运行后,几乎不可能有条件从安装的计量点位拆卸送检,此类问题在工序能耗气体介质的测量场景中尤其突显。基于柳钢转炉炼钢厂能源计量管理需求和应用于工业领域的检测计量技术现状,结合现场能源计量器具的检校要求,对流量计量仪表进行在线校准,以期最大程度降低校准工作对现场生产造成的影响。
Most energy measuring instruments in the steel industry are almost impossible to disassemble and send for inspection from the installed measuring points after installation,debugging,and operation.This type of problem is particularly prominent in the measurement scenarios of process energy consumption gas media.Based on the energy metering management needs of Liugang Converter Steelmaking Plant and the current status of detection and metering technology applied in the industrial field,combined with the calibration requirements of on-site energy metering instruments,online calibration of flow metering instruments is carried out to minimize the impact of calibration work on on-site production.
作者
陈秀峰
陈俊成
谭少军
陈山
Chen Xiufeng;Chen Juncheng;Tan Shaojun;Chen Shan(Liuzhou Iron and Steel Co.,Ltd.,Liuzhou Guangxi 545000,China)
出处
《山西冶金》
CAS
2024年第3期229-231,共3页
Shanxi Metallurgy
关键词
能源计量
气体介质
转炉炼钢厂
在线校准
energy metering
gas medium
converter steelmaking plant
online calibration