期刊文献+

基于细观力学的多相耐火材料压缩状态损伤表征

Damage characterization of multiphase refractories under compression based on mesomechanics
下载PDF
导出
摘要 针对多相复合耐火材料压缩状态下的非线性力学行为,在细观损伤力学的基础上,对改进的广义自洽模型进行逆向求解,研究多相耐火材料受到压缩载荷时的损伤行为,提出一种能表征多相耐火材料在压缩载荷下非线性损伤行为的方法。以AMC(aluminum-magnesium-carbon)多相耐火材料为例,利用该方法对其在受压状态下的力学行为进行表征。结果显示,表征结果和实验值吻合较好,为多相复合耐火材料的损伤表征提供了一种思路和理论基础。 For the nonlinear mechanical behavior of multiphase composite refractory under compression,on the basis of microscopic damage mechanics,the improved generalized self-consistent model was solved inversely,the damage behavior of multiphase refractory under compression load was investigated,and a method that can characterize the nonlinear damage behavior of multiphase refractory under compression load was proposed.Taking the AMC(aluminum-magnesium-carbon)multiphase refractory as an example,the mechanical behavior under compression was characterized by this method.The results show that the characterization results of this method are in good agreement with the experimental values,which provides an idea and a theoretical basis for the damage characterization of multiphase composite refractory.
作者 黄志兴 王志刚 刘昌明 李贤军 HUANG Zhixing;WANG Zhigang;LIU Changming;LI Xianjun(The State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081,China;Key Laboratory of Metallurgical Equipment and Control of Ministry of Education,Wuhan University of Science and Technology,Wuhan 430081,China;School of Mechanical Automation,Wuhan University of Science and Technology,Wuhan 430081,China)
出处 《粉末冶金材料科学与工程》 2024年第2期93-100,共8页 Materials Science and Engineering of Powder Metallurgy
基金 耐火材料损伤状态的声学主被动监测机理与方法研究(51505346) 面向教育“新基建”的《工程热力学》课程体系改革与教材建设创新实践(2023233)。
关键词 细观损伤力学 多相耐火材料 损伤表征 广义自洽模型 非线性力学行为 microscopic damage mechanics multiphase refractory damage characterization generalized self-consistent model nonlinear mechanical behavior
  • 相关文献

参考文献4

二级参考文献27

  • 1王宝生,成来飞,张立同,徐永东.氧化铝基陶瓷型芯的脱芯工艺研究[J].铸造,2005,54(8):758-760. 被引量:13
  • 2覃业霞,杜爱兵,张睿,潘伟.精密铸造用氧化铝基复合陶瓷型芯[J].稀有金属材料与工程,2007,36(A01):774-776. 被引量:11
  • 3Zhigang Wang,Jianyi Kong,Yourong Li,Nan Li.Prediction of properties of Al2O3-C refractory based on microstructure by an improved generalized self-consistent scheme[J]. Metallurgical and Materials Transactions B . 2005 (5)
  • 4Z. Zhong,S. A. Meguid.On the Elastic Field of a Shpherical Inhomogeneity with an Imperfectly Bonded Interface[J]. Journal of Elasticity . 1997 (2)
  • 5Shashidhar N,ShenoyA.On usingmicromechanical modelstode-scribe dynamic mechanical behavior of asphalt mastics. Mech Ma-ter . 2002
  • 6Robin J M,Berthand Y,Schmitt N.Thermomechanical behaviourof magnesia-carbon refractories. British Ceramic Transactions and Journal . 1998
  • 7Schmitt N,Berthaud Y,Themines D,et al.Modeling of the ther-momechanical behavior of magnesia carbon refractory materials. Proceedings of UNITECR‘‘‘‘95 . 1995
  • 8Schmitt N,Burr A,Berthaud Y,et al.Micromechanics applied tothe thermal shock behavior of refractory ceramics. Mechanics of Materials . 2002
  • 9Evans AG,Zok FW,McMeekingRM.Fatigueof ceramicmatrixcomposites. Acta Metallurgica et Materialia . 1995
  • 10Christensen RM,Lo KH.Solutions for effective shear properties in three phase sphere and cylinder models. Journal of the Mechanics and Physics of Solids . 1979

共引文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部