摘要
文章通过研究Fe-Co-Sn预合金不同含量比例的配方试样块力学性能及显微结构,优选出一种配方C1制备样品绳,并通过样品绳进行现场切割测试,分析样品绳串珠的磨损量、串珠切割状态及切割效率与寿命数据,获得Fe-Co-Sn预合金配方制备组合绳锯使用性能。
The article studies the mechanical properties and microstructure of formula sample blocks with different content ratios of Fe-Co-Sn pre-alloy,selects a formula C1 to prepare sample ropes,and conducts on-site cutting tests on the sample ropes to analyze the wear amount,cutting state,cutting efficiency,and service life data of the sample rope beads.The performance of the Fe-Co-Sn pre-alloy formula for preparing composite rope saws is obtained.
作者
杨理清
YANG Liqing(Guilin Tebon Superhard Material Co.,Ltd.,Guilin,Guangxi 541004,China;Guangxi Key Laboratory of Superhard Material,China Nonferrous Metal(Guilin)Geology And Mining Co.,Ltd.,Guilin 541004,China;National Engineering Research Center for Special Mineral Material,China Nonferrous Metal(Guilin)Geology And Mining Co.,Ltd.,Guilin 541004,China)
出处
《超硬材料工程》
CAS
2024年第3期9-16,共8页
Superhard Material Engineering
基金
中国有色桂林矿产地质研究院有限公司科技创新基金“高硬耐火砖用金刚石锯片的开发”(项目编号:KDYCXJJ202208)。
关键词
金刚石绳锯
预合金配方
使用性能
Combination rope saw
pre-alloy formula
usage performance
