摘要
Hot air sintering technology is used to improve the quality and production efficiency of sintered ore.However,the current thick layer condition highlights the disadvantage of the low oxygen potential of the hot air sintering layer.Therefore,it is considered to use oxygen enrichment sintering to improve the environment of hot air sintering.Traditional sintering,hot air sintering,and oxygen-rich hot air sintering were compared through sintering cup experiments,and the influence of hot air and oxygen-rich hot air on sintering indexes was clarified.Hot air reduced the vertical sintering velocity,while improved the yield and tumbler index.Oxygen-rich hot air sintering contributed to improving the vertical sintering velocity while ensuring the quality of sintered ore,thus comprehensively improving production efficiency.Under the action of hot air,the highest temperature of the sintering layer increased and the high-temperature holding time was prolonged.After oxygen enrichment,the combustion efficiency of fuels in the upper layer of materials was promoted,which optimized heat distribution in the middle and lower layers of materials and increased the content of calcium ferrite in the sintered ore,thus strengthening the sintering process.
基金
supported by the National Natural Science Foundation of China(Nos.51974371 and 52274344)
the Science and Technology Innovation Program of Hunan Province(No.2023RC3042)
Provincial Natural Science Foundation of Hunan(Nos.2023JJ20068 and 2022JJ30723)
China Baowu Low Carbon Metallurgy Innovation Foundation(BWLCF202118).
