A review on adhesion behavior of chip seal pavement and aggregate

Chip seal is widely used for preventive maintenance to mitigate pavement deterioration,but it is prone to aggregate loss during pavement service.To further promote the development and application of chip seals in road engineering in China,the research progress of the adhesion behavior of aggregate and binder in chip seals was reviewed in this paper,focusing on the adhesion mechanism of emulsified asphalt and alkaline aggregate.The Influencing factors and evaluation methodology of chip seals'aggregate adhesion behavior were also discussed.The results demonstrate that the adhesion process between emulsified asphalt and alkaline aggregate is divided into three processes including infiltration,demulsification,and cluster,which is more complicated when compared to hot asphalt.When designing a chip seal,not only the characteristics of single material should be paid attention to,but also the combination of binder and aggregate matters a lot.To form good adhesion between aggregate and asphalt binder,various influencing factors such as material selection,design method,and construction technical index should be considered comprehensively in the whole design,construction,and operation process.Three methods for evaluating adhesion behavior are summarized,including macroscopic adhesion performance tests,image analysis technology,and model prediction.It is not objective to evaluate the aggregate adhesion behavior of chip seal only by a single evaluation method.A comprehensive evaluation based on the micro-macro multi-scale method should be considered in the future.