期刊文献+

Optimizing calcination of coal by-products for maximizing REE leaching recovery and minimizing Al,Ca,and Fe contamination

原文传递
导出
摘要 High-temperature calcination is effective in improving the leaching characteristics of rare earth elements(REEs)from conventional REE-bearing minerals by transforming them into more leachable forms.However,the recovery of contaminants such as Al,Fe,and Ca also increases significantly.The objective of the study was to maximize the REE extraction while minimizing the concentration of contaminant ions(Al,Ca,and Fe)in the leach solution.Representative density fractions of the coarse refuse from the Baker and Fire Clay seam coal refuse were pulverized to a top size of 180μm and used as a feedstock for the study.All the samples generated from thermal treatment were leached at 1%(w/v)using 1.2 mol/L sulfuric acid at 75℃ for 2 h.Test results from a parametric program based on a Box-Behnken design were used for modeling and optimization of three operating parameters associated with the lab-scale calcination process.The parameters included temperature(400-800℃),ramp rate(2-10℃/min)and holding time(0-120 min).It was determined that the calcination temperature was the most significant parameter influencing REE recovery.The majority of the heavy rare earth elements(HREEs)were found to be present in an insoluble form in the calcination products and were marginally affected by thermal treatment.A strong correlation between light rare earth elements recovery(LREEs)and Al suggested a possible association with clays.The optimum operating conditions for high REE recovery with comparatively lower contaminant concentration for 1.6 specific gravity float and 2.2 sink fractions of Baker and Fire Clay seam material were determined to be at 776,800℃ and 407,800℃,calcining temperatures,respectively.A higher optimum temperature of 1.6 float fraction of Baker seam relative to Fire Clay seam material was due to elevated pyrite concentration in Baker seam material.Thermal treatment at 400℃ converted pyrite into a soluble intermedium iron oxide,resulting in a high Fe content in the leachate.Calcining at 776℃ converted most of the soluble iron oxide into insolubleα-hematite,considerably reducing the Fe concentration in the solution.
出处 《Journal of Rare Earths》 SCIE EI CAS CSCD 2024年第7期1354-1365,I0006,共13页 稀土学报(英文版)
基金 Project supported by the U.S.Department of Energy(DEFE0031827)。
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部