口腔种植修复中钛基底氧化锆基台的制作和力学性能

Manufacture and mechanical property on zirconia abutments with a titanium base in dental implant restoration

背景:随着计算机辅助设计和计算机辅助制造技术的发展,钛基底氧化锆基台因具备良好的应用优势被广泛运用于临床,但仍存在一些问题,尚缺乏共识性的设计标准。目的:综述钛基底氧化锆基台的制作方法及基台连接、穿龈设计、基台角度和粘接对钛基底氧化锆基台各类力学性能的影响。方法:检索Pub Med数据库和中国知网2010-2023年发表的相关文献,检索词为“zirconia abutment,titanium base;氧化锆基台,钛基底”,部分经典文献延长检索时间限制,通过纳入和排除标准获取相关文献,对57篇符合标准的文献进行综述。结果与结论:建议临床医生尽量选择具有抗旋结构的基台连接或是具有莫氏锥度的非抗旋连接,当运用钛基底氧化锆基台时,种植体应放置在正确的轴向角度(植体轴向向唇侧倾斜角度不超过15°或略向腭侧倾斜);当植体轴向向唇侧倾斜角度≥30°时,应当适当降低咬合力,以降低种植体、基台及修复体机械并发症和生物并发症的风险;应尽可能选择穿龈高度较高的钛基底,并且其穿龈角度不应超过40°。Multilink Hybrid Abutment可以作为氧化锆基台与钛基底口外粘结的首选粘接剂。

BACKGROUND:With the development of computer-aided design and computer-aided manufacturing technology,zirconia abutments with a titanium base are widely used in clinic due to its good application advantages,but there are still some problems and a lack of consensus design standards.OBJECTIVE:To review the fabrication methods of Ti-base zirconia abutment,and the effect of abutment connection,emergence design,abutment angle,and bonding on mechanical properties of Ti-base zirconia abutment.METHODS:Relevant literature published from 2010 to 2023 was searched in CNKI and PubMed databases with the search terms“zirconia abutment,titanium base”in Chinese and English,respectively.The search time limit was extended for some classical literature.The relevant literature was obtained through inclusion and exclusion criteria,and 57 eligible documents were included for review.RESULTS AND CONCLUSION:It is recommended that clinicians try to select antirotational titanium bases or rotational titanium bases with a Morse taper connection.Implants should be placed in the correct axial angulation of not more than 15°or with an inclination to the palatal side when using angled zirconia abutments.When a≥30°labial inclination is followed for implant placement,the bite force must be decreased effectively to reduce the risk of mechanical and biological complications of implants,abutments,and prostheses.Ti-base zirconia abutments with a higher gingival height should be selected,and its restorative angle should not exceed 40°.Multilink Hybrid Abutment could be the first choice for extraoral bonding of zirconia abutment to titanium bases.