能耗感知的云制造服务选择与调度优化方法

Energy consumption aware method for cloud manufacturing service selection and scheduling optimization

云制造服务选择与调度(CMSSS)问题在优化资源配置和满足用户需求方面被广泛关注。然而,大多数现有方法对制造设备的预热过程考虑不足,导致了能源的浪费。为了降低制造能耗并保证服务质量(QoS),建立了CMSSS的多目标优化模型,通过任务衔接度模型量化制造服务设备的预热能耗,并提出一种能耗感知的云制造服务选择与调度优化方法(ECAM)。该方法根据QoS指标为任务选择复合服务,根据制造服务占用情况将子任务调度到空闲时段,并最大化任务衔接度,以降低制造设备的预热能耗。结果表明,在6种评价指标权重下,ECAM比以往的可行调度生成方案(FSGS)具有更好的适应度。在具有预热过程的云制造场景中,ECAM能获得与FSGS基本一致的QoS满意度和更好的能耗经济性。

Cloud Manufacturing Service Selection and Scheduling(CMSSS)problem has attracted much attention in optimizing resource allocation and meeting user requirements.However,most existing methods pay insufficient consideration to the preheating process of manufacturing equipment,resulted in wasted energy.To reduce manufacturing energy consumption and guarantee Quality of Service(QoS),a multi-objective optimization model for CMSSS was established,the preheating energy consumption of manufacturing service equipment was quantified by a task cohesion degree model,and an Energy Consumption Aware Method(ECAM)for CMSSS optimization was proposed.The method selected a composite service for the task according to QoS metrics,and scheduled subtasks to meet the highest cohesion degree in the idle time of the manufacturing service according to the occupation,so as to reduce the preheating energy consumption of the manufacturing equipment.The results showed that ECAM had superior fitness to the previous Feasible Schedule Generation Schema(FSGS)under 6 weights evaluation metrics.In cloud manufacturing scenarios with preheating process,ECAM achieved basically the same QoS satisfaction and better energy economy as FSGS.