摘要
随着自动化集装箱码头布置形式的多样化,传统的照明布置形式已无法适应自动化码头的照明需求。根据自动化码头工艺路线及功能划分不同,分析其照明需求,提出针对不同工艺路线、不同区域的照度需求。引入DIALux照明软件建立模型,对钦州U形自动化码头低杆路灯照明方案和南沙四期自动化码头高杆灯照明方案进行计算分析,验证不同工艺路线和不同照明方案设计的合理性。针对不同装卸作业工况下的照明需求,提出优化的灯具分组控制逻辑和灯控系统设计。
With the diversification of the layout forms for automated container terminals,traditional lighting layout forms has been unable to meet the lighting requirements of automated terminals.This article analyzes the lighting requirements of automated docks based on different process routes and functional divisions,and proposes illumination requirements for different areas of different process routes.The DIAlux lighting software is introduced to establish a model,calculate and analyze the low pole street lamp lighting scheme of Qinzhou U-shaped automatic terminal and the high pole lighting scheme of Nansha Phase IV automatic terminal,and verify the rationality of different lighting schemes for different process routes.According to the different lighting requirements under different loading and unloading conditions,an optimized lighting grouping control logic and lighting control system design are proposed.
作者
柴治国
CHAI Zhiguo(CCCC-FHDI Engineering Co.,Ltd.,Guangzhou 510290,China)
出处
《水运工程》
2024年第8期170-174,共5页
Port & Waterway Engineering