摘要
水平轴潮流能水轮机作为目前技术最成熟的潮流能获能装置,其水动力性能关系到整个潮流能量的转换效率。为提高潮流能的转换效率,对水轮机设计一种“M”型导流罩,基于Helicopter Multi-Block 3方法优化导流罩入口的开口角度,结合Fluent仿真软件探讨不同导流罩入口角度对水轮机水动力的影响。结果表明,加导流罩后水轮机水动力性能有明显提升,并且在导流罩入口角度为22.5°时水轮机水动力性能最佳,此时水轮机能量利用系数也较裸机的能量利用系数增大10%。
As the most mature tidal turbine,the hydrodynamic performance of the horizontal axis tidal turbine is related to the conversion efficiency of the tidal.In order to improve the conversion efficiency of tidal,an‘M’type duct is designed,and based on the Helicopter Multi-Block 3 method to optimise the opening angle of different duct inlets,the influence of different duct inlet angles on the hydrodynamic performance of the turbine is investigated with the combination of Fluent simulation software.The results show that the hydrodynamic performance of the turbine is significantly improved after the addition of the duct,and the turbine hydrodynamic performance is best when the duct inlet angle is 22.5°,and the power coefficient at this time is also about 10% larger than that of the bare turbine.
作者
刘葳兴
胡婉婷
王梓恒
陈少华
郑雄波
孙成娇
张之阳
崔琳
LIU Weixing;HU Wanting;WANG Ziheng;CHEN Shaohua;ZHENG Xiongbo;SUN Chengjiao;ZHANG Zhiyang;CUI Lin(School of Ocean Engineering,Jiangsu Ocean University,Lianyungang 222005,China;School of Makarov College of Marine Engineering,Jiangsu Ocean University,Lianyungang 222005,China;School of Science,Harbin Engineering University,Harbin 150001,China;school of Computer Engineering,Hubei University of Arts and Sciences,Xiangyang 441053,China;National Ocean Technology Center,Tianjin 300112,China)
出处
《中国测试》
CAS
北大核心
2024年第8期86-93,共8页
China Measurement & Test
基金
国家自然科学基金(52101356,52001138)
连云港市重点研发计划(CG2224)
连云港市第六期“521工程”科研项目资助计划(LYG06521202337)
湖北省自然科学基金计划项目(2024AFB147)
湖北省教育厅科学研究计划资助项目(Q20222604)
国自科培育项目(2023pygpzk10)。
