摘要
某型输送机链轮轴,其制造难点在于气割外形、感应淬火、矩形内花键加工等方面,根据制造工艺流程分析,对上述难点进行工艺试验研究,完成链轮轴制造加工,产品检测结果符合技术要求,为同类型结构产品的加工制造提供应用参考。
A conveyor chain wheel shaft is difficult to manufacture in terms of gas cutting shape,induction quenching,rectangular inner spline processing,etc.Based on the analysis of the manufacturing process flow,process experiments are conducted to study the above difficulties,and the manufacturing of the chain wheel shaft is completed.The product inspection meets the technical requirements,providing application reference for the processing and manufacturing of similar structural products.
作者
张艺
米佩
李清
朱海鹏
ZHANG Yi;MI Pei;LI Qing;ZHU Haipeng(CCTEG Ningxia Tiandi Benniu Industrial Group Co.,Ltd.,Shizuishan,753001,Ningxia,China;Ningxia Tiandi Benniu Transmission Technology Co.,Ltd.,Yinchuan 750021,Ningxia,China)
基金
天地科技股份有限公司科技创新创业资金专项项目“复杂工况下链轮耐磨制造技术的研究与应用”(2023-TD-MS004)
宁夏回族自治区重大科技成果转化项目“矿用重型刮板输送装备大功率减速器产业化应用项目”(2023CJE09010)
中国煤科项目收益分红激励项目“超重型刮板输送机用2000kW行星减速器”(2024CGZH02)。
关键词
链轮轴
气割
感应淬火
sprocket shaft
gas cutting
induction hardening