期刊文献+

基于数字仿真的调门油动机虚拟调试研究

Research on Virtual Debugging of Control Valve Hydraulic Motor Based on Digital Simulation
下载PDF
导出
摘要 随着近年来“中国制造2025”“智慧汽轮机”等新兴研究发展规划的提出,如何提高系统的数字化水平成为了行业的研究热点。利用AMESim搭建高压调门油动机的数字仿真模型,在模型中设置故障模块,利用计算机仿真技术实现了对油动机工作状态的仿真模拟。针对其正常工况与异常工况进行仿真,通过相关参数的调整实现了对油动机不同工况的虚拟调试,模型仿真结果与实验实测数据相对偏差不超过5%,对比结果验证了所建立的模型可以很好地反映油动机多工况下的工作状态与性能。研究成果可为油动机的状态监测与故障识别提供新的研究思路。 With the resent proposal of research and development plans,such as“Made in China 2025”and“Intelligent Steam Turbine”,to enhance the digitalization level of industry systems has become a research focus.A digital simulation model of high-pressure control valve hydraulic motor was constructed using AMESim,and by incorporating a fault module into the model,the hydraulic motor's operating states were simulated and modeled utilizing computer simulation technology.Simulations were conducted for both normal and abnormal operating states,and virtual debugging of the hydraulic motor under various conditions was realized through adjustment of relevant parameters.The relative deviations of the simulation results of the model from the experimental measurements were within 5%,showing that the model could effectively reflect the working state and performance of the hydraulic motor on multiple operating conditions.The research results can provide reference for condition monitoring and fault identification of hydraulic motor.
作者 王一男 张世永 杨晶 林明星 郑小乐 刘阳 郝月东 WANG Yinan;ZHANG Shiyong;YANG Jing;LIN Mingxing;ZHENG Xiaole;LIU Yang;HAO Yuedong(Guodian&Jiantou Innermongolia Energy Investment Co.,Ltd.,Ordos 017208,China;Shanghai Turbine Works Co.,Ltd.,Shanghai 200240,China;Department of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China)
出处 《热力透平》 2024年第3期214-221,共8页 Thermal Turbine
关键词 调门油动机 数字仿真 系统建模 虚拟调试 control valve hydraulic motor digital simulation system modeling virtual debugging
  • 相关文献

参考文献3

二级参考文献13

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部