期刊文献+

湿法混炼胶料性能研究

Study on Properties of Compounds Mixed by Wet Mixing Process
下载PDF
导出
摘要 研究对比采用湿法混炼工艺和干法混炼工艺的混炼胶性能和成品轮胎性能。结果表明:湿法混炼工艺不仅能提高填料在橡胶基体中的分散性,而且环保、生产周期短、能耗低;与干法混炼胶料相比,湿法混炼胶料的300%定伸应力、撕裂强度和耐磨性能等都有不同程度的提高;胎面采用湿法混炼胶料的成品轮胎的滚动阻力降低,耐磨性能提高。 The properties of compounds mixed by wet mixing process and dry mixing process and the performance of corresponding finished tires were studied and compared.The results showed that the wet mixing process not only improved the dispersion of fillers in the rubber matrix,but also had the advantages of environmental protection,short production cycle and low energy consumption.Compared with the dry process mixed compounds,the modulus at 300%elongation,tear strength,wear resistance and of the wet process mixed compounds all had certain improvements.The rolling resistance of the finished tires with tread using wet process mixed compounds was reduced,and wear resistance was improved.
作者 邓世涛 边慧光 刘自光 赵阳 赵闯 DENG Shitao;BIAN Huiguang;LIU Ziguang;ZHAO Yang;ZHAO Chuang(Zhengdao Tire Co.,Ltd,Heze 274417,China;Qingdao University of Science and Technology,Qingdao 266061)
出处 《橡胶科技》 CAS 2024年第9期520-523,共4页 Rubber Science and Technology
关键词 湿法混炼工艺 干法混炼工艺 轮胎 滚动阻力 耐磨性能 wet mixing process dry mixing process tire rolling resistance wear resistance
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部