摘要
将不同用量墨泥与不同牌号石蜡油和氯化聚乙烯进行配合,重点研究墨泥作为协效增塑剂对三元乙丙橡胶和丁腈/氯化聚乙烯橡胶增塑效果的影响。结果表明,非极性三元乙丙橡胶和极性丁腈/氯化聚乙烯橡胶的物理机械性能和硫化性能随着墨泥用量的增加有一定程度的提高,说明墨泥有软化增塑的作用且增塑效果较好。
Different amounts of ink sludge were combined with different grades of paraffin oil and chlorinated polyethylene,focusing on the influence of ink sludge as a synergistic plasticizer on the plasticizing effect of EPDM and nitrile/chlorinated polyethylene rubber.The results show that the physical and mechanical properties and vulcanization properties of non-polar EPDM and polar nitrile/chlorinated polyethylene rubber are improved to a certain extent with the increase of the dosage of ink sludge,which indicates that ink sludge has a good softening and plasticizing effect.
作者
李昱彤
关迎东
边帅
赵帅
李琳
辛振祥
LI Yutong;GUAN Yingdong;BIAN Shuai;ZHAO Shuai;LI Lin;XIN Zhenxiang(College of Polymer Science and Engineering,Qingdao University of Science and Technology,Qingdao 266042,China;Marine Chemical Research Institute Co.,Ltd.,State Key Laboratory of Marine Coatings,Qingdao 266071,China;Hubei Sanjiang Aerospace Jianghe Chemical Technology Co.,Ltd.,Yichang 444200,China)
出处
《弹性体》
CAS
2024年第4期35-41,共7页
China Elastomerics
基金
国家自然科学基金资助项目(51603111,5170311)
山东省自然科学基金面上项目(ZR2021ME107)
中国博士后科学基金项目(2022M721903,2021M700553,2020M672014)。
关键词
墨泥
协效增塑剂
三元乙丙橡胶
丁腈/氯化聚乙烯橡胶
石蜡油
氯化聚乙烯
ink mud
synergistic plasticizers
EPDM rubber
nitrile/chlorinated polyethylene rubber
paraffin oil
chlorinated polyethylene
