自平衡试桩理论解析转换方法及工程应用

Analysis Conversion Method of Self-balanced Test Pile and Engineering Application

提出一种基桩承载力自平衡测试的解析转换方法,采用有限差分法建立上、下段桩各微段控制方程,通过编程求解上、下桩身各微段处的内力及变位量,代入精确转换公式,将自平衡试桩结果转换为类似传统静载测试荷载(Q)-位移(s)曲线形式,并求解其极限承载力。结合广西来宾裕达梧桐苑3根钻孔灌注桩自平衡法测试工程,应用该解析转换方法对测试结果进行转换。研究表明,3根试桩内力均表现为离加载端较近的土层承担的荷载较大,轴力由加载端向两端衰减程度逐渐减小,且侧摩阻力变化特性呈现双曲线分布。就单桩承载力而言,简化转换方法偏于保守,而解析转换方法考虑了桩侧各层土的性质差异,相比精度可提高约12%。该解析转换方法能准确地反映出上、下段桩身内力分布规律以及桩侧土层承载特性,且可以高效准确地实现承载力的转换,在基桩承载力自平衡测试工程领域具有广泛应用前景。

An analytical conversion method for self-balanced test of foundation pile was proposed.The finite difference method was used to establish the control equations for each micro-section of the upper and lower piles,and the internal forces and displacements at each micro-section of the upper and lower piles can be obtained by programmed solution,which can be substituted into the exact conversion formula to convert the self-balanced test pile results into the form of the load(Q)-displacement(s)curves similar to those of the traditional static test and to solve the ultimate bearing capacity.This analytical conversion method was applied to convert the test results in conjunction with the test project of self-balanced method for three drilled piles in Yuda Wutong Court,Laibin,Guangxi.The internal forces of the three test piles all show that the soil layer closer to the loading end bears a larger load,the axial force gradually decreases from the loading end to both ends,and the change characteristics of the lateral resistances show a hyperbolic distribution.In terms of single pile bearing capacity,the simplified conversion method is conservative,while the analytical conversion method takes into account the differences in the characteristics of the soil layers on the pile side,and the accuracy can be improved by about 12%compared to the simplified conversion method.The analytical conversion method can accurately reflect the distribution law of internal force of upper and lower pile body and the bearing characteristics of soil layer on the pile side,and can efficiently and accurately realize the conversion of bearing capacity,which is widely used in the field of self-balanced test engineering of pile foundation bearing capacity.