Chitosan-based triboelectric materials for self-powered sensing at high temperatures

Although biopolymers have been widely utilized as triboelectric materials for the construction of self-powered sensing systems,the annihilation of triboelectric charges at high temperatures restricts the output signals and sensitivity of the assembled sensors.Herein,a novel chitosan/montmorillonite/lignin(CML)composite film was designed and employed as a tribopositive layer in the assembly of a self-powered sensing system for use under hot conditions(25-70℃).The dense contact surface resulting from the strong intermolecular interaction between biopolymers and nanofillers restrained the volatilization of induced electrons.The optimized CML-TENG delivered the highest open-circuit voltage(V_(oc))of 262 V and maximum instantaneous output power of 429 mW/m^(2).Pristine CH-TENG retained only 39%of its initial Voc at 70℃,whereas the optimized CM_(5)L_(3)-TENG retained 66%of its initial Voc.Our work provides a new strategy for suppressing the annihilation of triboelectric charges at high temperatures,thus boosting the development of self-powered sensing devices for application under hot conditions.