期刊文献+

异步双波长脉冲锁模动力学特性

Dynamics of asynchronous dual-wavelength pulse mode-locking
下载PDF
导出
摘要 设计了基于双峰滤波的掺铒全光纤激光模型,开展了异步双波长脉冲锁模动力学特性的数值模拟研究。以同一噪声作为初始条件,分别将增益光纤饱和能量设置为15、40、55 pJ,模拟结果表明:噪声最终分别演化成为单波长脉冲锁模、异步双波长脉冲锁模、孤子分子形式的异步双波长脉冲锁模,其中异步双波长脉冲生成的演化过程经历噪声脉冲、多脉冲锁模与增益竞争、稳定的异步双波长脉冲锁模3个阶段;增益光纤饱和能量的大小直接决定脉冲在增益竞争中的演化方向。脉冲碰撞过程中互相位调制作用引起的脉冲频率移动,导致时域脉冲时间抖动。 An erbium-doped all-fiber laser model based on dual-peak filter was designed,and the numerical simulation of the dynamic characteristics of asynchronous dual-wavelength pulse mode-locking was carried out.Using the same noise as the initial condition,and setting the saturation energy of the gain fiber to 15 pJ,40 pJ and 55 pJ,respectively,the simulation results show that the noise finally evolves into single-wavelength pulse mode-locking,asynchronous dual-wavelength pulse mode-locking,and asynchronous dual-wavelength pulse mode-locking in the form of soliton molecules,in which the evolution process of asynchronous dual-wavelength pulses goes through three stages:noise pulse generation,multi-pulse mode-locking and gain competition,and stable asynchronous dualwavelength pulse mode-locking.Besides,the saturation energy of the gain fiber directly determines the evolution direction of the pulse in the gain competition,and the pulse frequency shifts caused by cross-phase modulation during the pulse collision process result in the time domain pulse time jitter.
作者 刘瑞燕 金鑫鑫 段延敏 朱海永 Liu Ruiyan;Jin Xinxin;Duan Yanmin;Zhu Haiyong(College of Mathematics and Physics,Wenzhou University,Wenzhou 325035,China;College of Electrical and Electronic Engineering,Wenzhou University,Wenzhou 325035,China)
出处 《强激光与粒子束》 CAS CSCD 北大核心 2024年第10期117-123,共7页 High Power Laser and Particle Beams
基金 国家自然科学基金项目(62205251,62275200,62075167) 温州市基础性公益科研项目(G2023030) 温州大学硕士研究生创新基金项目(3162024003041)。
关键词 异步双波长脉冲 自启动锁模 锁模动力学 asynchronous dual-wavelength pulses self-starting mode-locking mode-locking dynamics
  • 相关文献

参考文献3

二级参考文献14

共引文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部