摘要
Tight focusing with very small f-numbers is necessary to achieve the highest at-focus irradiances.However,tight focusing imposes strong demands on precise target positioning in-focus to achieve the highest on-target irradiance We describe several near-infrared,visible,ultraviolet and soft and hard X-ray diagnostics employed in a~10^(22)W/cm^(2)laser±plasma experiment.We used nearly 10 J total energy femtosecond laser pulses focused into an approximately1.3-μm focal spot on 5±20μm thick stainless-steel targets.We discuss the applicability of these diagnostics to determine the best in-focus target position with approximately 5μm accuracy(i.e.,around half of the short Rayleigh length)and show that several diagnostics(in particular,3ωreflection and on-axis hard X-rays)can ensure this accuracy.We demonstrated target positioning within several micrometers from the focus,ensuring over 80%of the ideal peak laser intensity on-target.Our approach is relatively fast(it requires 10±20 laser shots)and does not rely on the coincidence of low-power and high-power focal planes.
基金
financial support from ELI-Beamlines
project Advanced Research using High Intensity Laser Produced Photons and Particles(ADONIS)(Project No.CZ.02.1.01/0.0/0.0/16_019/0000789)from the European Regional Development Fund
QST-IRI
the QST President’s Strategic Grant(Creative Research)
JSPS KAKENHI JP17F17811,JP19KK0355,JP19H00669 and JP22H01239
the Czech Ministry of Education
Youth and Sports(CMEYS)for the financial support of the project number LM2023068
partly supported by JSPS KAKENHI Grant No.JP23H01151。