摘要
在海洋石油生产树或水下设备管线系统中,当需要对管线进行开、闭等切换操作时,由于深海环境无法手动操作,通常需要使用作业级ROV或水下测控系统来远程控制。本文以实现RMR举升泵组管线多状态工作模式为目标,基于水下液压系统原理、参数和结构设计,搭建了水下HPU系统;选型液控球阀作为执行件,提出了适应RMR水下工况环境的球阀可靠性测试方案,完成了一套适用于RMR举升泵组管线切换系统的设计,对于RMR举升泵组及其他水下设备管线切换系统的设计具有广泛应用价值。
In offshore oil production trees or subsea equipment pipeline systems,when it is necessary to perform switching operations such as opening and closing the pipelines,manual operation is not feasible in deep-sea environments.Therefore,work-class ROVs or underwater measurement and control systems are typically employed for remote control.This paper aims to achieve a multi-state working mode of the RMR lift pump group pipeline,establishing an underwater HPU system based on the principles,parameters,and structural design of underwater hydraulic systems.Selection of hydraulic control ball valves as the actuator,and a reliable testing scheme for ball valves adapted to the underwater working conditions of RMR is proposed.A design for a pipeline switching system suitable for the RMR lift pump group has been completed.This research has a wide range of application value for the RMR lift pump sets and other underwater equipment pipeline switching systems design.
作者
刘晓林
姜宇昊
高洁云
王林清
殷国乐
LIU Xiaoin;JIANG Yuhao;GAO Jieyun;WANG Linqing;YIN Guoyue(Institute of Exploration Techniques,CAGS,Langfang Hebei 065000,China;Innovation Base for Automatic and Intelligent Drilling Equipment,Geological Society of China,Langfang Hebei 065000,China;Innovation Center for Deep Exploration and Drilling Equipment Technology,CGS,Langfang Hebei 065000,China)
出处
《钻探工程》
2024年第S01期238-244,共7页
Drilling Engineering
基金
国家重点研发计划项目“深海开路泥浆液位闭环控制系统研制”(编号:2021YFC2800802)。