Microstructure evolution and enhanced fatigue behavior in the Mg-10Li-5Zn-0.5Er alloys micro-alloyed with Yb

In this paper,(0.2-1 wt%)Yb was added to improve the tensile properties and high-cycle fatigue behavior of the as-cast and as-extruded Mg-10Li-5Zn-0.5Er alloys.It is found that Yb mainly affects the mechanical properties of the alloy by changing the grain size,type and morphology of the second phases.Yb mainly exists in the formation of Mg_(2)Yb and Mg-Zn-Yb phases in the metallographic structure.With the addition of Yb,the grains are refined and these Yb-containing phases replace the large-sized MgLiZn phase to be enriched at the grain boundaries.While the addition of excess Yb reduces the number of small-sized MgLiZn phases in the grain,thus reducing the alloys’mechanical performance.After extrusion,the small-sized MgLiZn phase is refined and the number increases,which effectively improves the tensile and fatigue strength of the alloy.The fatigue strength is mainly affected by the number and morphology of the second phase,positively correlated with the strength.Balanced in grain size and number and size of second phases,the extruded alloy with 0.2Yb added exhibits excellent mechanical properties with the yield strength,ultimate tensile strength and elongation of 292 MPa,303 MPa and 11.7%,and an fatigue strength of 130 MPa.