摘要
纺织行业的计量技术规范,是对纺织品行业专用计量器具进行校准溯源的重要技术依据,标准编制的原则是根据JJF 1071—2010《国家计量校准规范编写规则》进行编制。针对现场校准的计量器具,其控制校准条件应当与具体的使用条件一致,这是基本的校准要求。为了更好地依据纺织行业计量技术规范开展纺织行业校准活动,关于环境温湿度对数据、结果复现性、设备的使用、质量控制等环节进行了综合讨论,希望能为相关的工作人员和部门在制定规范和标准起草时在校准条件的环境温湿度控制方面有更明确的参考。
The metrological technical specifications for the textile industry are an important technical basis for calibrating and tracing specialized measuring instruments in the textile industry.The principle of stan⁃dard preparation is based on the JJF 1071—2010 National Metrological Calibration Specification Writing Rules.For on-site calibrated measuring instruments,in the process of controlling calibration conditions,they should be consistent with specific usage conditions,which is a basic calibration requirement.In order to better carry out calibration activities in the textile industry based on the metrological technical specifica⁃tions of the textile industry,the impact of environmental temperature and humidity on data,result reproduc⁃ibility,equipment use,quality control,and other aspects were comprehensively discussed.It is hoped that this can provide relevant staff and departments with clearer requirements for environmental temperature and humidity control of calibration conditions when drafting specifications and standards.
作者
李智
王金平
田洋
LI Zhi;WANG Jinping;TIAN Yang(China Textile Standard Inspection and Certification Co.,Ltd.,Beijing 100025,China)
出处
《纺织检测与标准》
2024年第5期36-39,共4页
Textile Testing and Standard
关键词
校准规范
纺织行业
环境条件
温度
湿度
calibration specifications
textile industry
environmental conditions
temperature
humidity