摘要
以提高耐火度为目的将氧化铝纤维掺入铝酸盐水泥中采用0.1%、0.2%、0.3%、0.4%掺量的氧化铝纤维进行试验,结果表明:试样常温力学性能随着煅烧温度升高而提高;氧化铝纤维掺量为0.3%最为合适,力学性能最好,线变化率最小;物相组成与显微结构分析表明,TiO2可以降低CA6的生成温度,促使CA6形成更大、更厚的六边形片状,使得结构耐火度及强度提高。
The experiment aimed to improve the refractoriness of calcium aluminate cement by adding alumina fibers in varying amounts(0.1%,0.2%,0.3%,and 0.4%).The analysis results indicate:the mechanical properties of the samples at room temperature improve with increasing calcination temperature;the optimal addition amount of alumina fibers is 0.3%,yielding the best mechanical properties and minimal linear change rate;phase composition and microstructure analysis show that TiO2 can lower the formation temperature of CA6,promoting the formation of larger and thicker hexagonal plates,thereby enhancing the structural refractoriness and strength.
作者
蒋李志鸿
文华
邓杨杨
谭树成
付文涛
刘颖
JIANG Lizhihong;WEN Hua;DENG Yangyang;TAN Shucheng;FU Wentao;LIU Ying(College of Civil Engineering and Architecture,Southwest University of Science and Technology,Mianyang 621010,China;Sichuan Shuyu Petroleum Construction and Installation Engineering Co.Ltd.,Chengdu 610084,China)
出处
《新型建筑材料》
2024年第11期67-70,76,共5页
New Building Materials
关键词
铝酸盐水泥
氧化铝纤维
浇注料
抗高温性能
aluminate cement
aluminum oxide fiber
castable materials
high temperature resistance performance