期刊文献+

编织-嵌槽型金属橡胶的力学性能和阻尼性能 被引量:3

Mechanical and Damping Characteristics of Knitted-Dapped Metal Rubber
下载PDF
导出
摘要 为解决低刚度金属橡胶在实际应用中的不足,制备了不同密度和厚度的编织-嵌槽型金属橡胶,并对其进行了静态力学试验和动态力学试验,研究了密度、厚度对金属橡胶静态刚度的影响以及频率、振幅、预压载荷对金属橡胶动态阻尼性能的影响。结果表明:密度和厚度的增加均会增大金属橡胶的静态刚度;频率对金属橡胶动态阻尼性能的影响不大;随着振幅的增大,金属橡胶的动态刚度减小,阻尼耗能逐渐增多;随着预压载荷的增大,金属橡胶的动态刚度增大,阻尼耗能逐渐增多。 Knitted-dapped metal rubber was developed to overcome the deficiencies of metal rubber with low stiffness in practical application and the samples with different density and thickness were manufactured.Static mechanical tests and dynamic mechanical tests were carried out to study the influences of density and thickness on static stiffness of the metal rubber,and the influences of frequency,amplitude and pre-load on dynamic damping characteristics of the metal rubber.The results show that static stiffness of the metal rubber raised with the density or thickness increasing.The frequency had little influence on the dynamic damping characteristics of the metal rubber.With the increase of the amplitude,the dynamic stiffness of the metal rubber decreased and the damping dissipation energy increased gradually.With the increase of the pre-load,the dynamic stiffness and the damping dissipation energy of the metal rubber all increased gradually.
机构地区 军械工程学院
出处 《机械工程材料》 CAS CSCD 北大核心 2014年第7期63-65,70,共4页 Materials For Mechanical Engineering
基金 武器装备"十二五"预先研究项目(51312060404)
关键词 编织-嵌槽型金属橡胶 密度 厚度 频率 振幅 预压载荷 knitted-dapped metal rubber density thickness frequency amplitude pre-load
  • 相关文献

参考文献7

二级参考文献27

共引文献58

同被引文献35

  • 1敖宏瑞,姜洪源,夏宇宏,A M Ulanov.金属橡胶弹性迟滞回线的一种新的建模方法[J].中国矿业大学学报,2004,33(4):453-456. 被引量:10
  • 2张新星,卢灿辉,梁梅.废旧轮胎橡胶的常温应力诱导固相力化学脱硫化研究[J].高分子材料科学与工程,2006,22(6):118-121. 被引量:30
  • 3MASSEY J I., PARR J C, WAGLER T A, et al. Ultrasound devulcanization of unfilled natural rubber networks, studied via component molecular mobilityFJ~. Polymer International, 2007, 56(7).. 860 869.
  • 4TAO G L, HE Q H, XIA Y P, et al. The effect ofdevulcanization level on mechanical properties of reclaimed rubber by thermal-mechanical shearing devulcanization ~J 1. Journal of Applied Polymer Science, 2013, 129 (5): 2598 2605.
  • 5HAS.SAN M M, ALY R O, ABDEL A S E, et al. Mechanochemical devulcanization and gamma irradiation of devulcanized waste rubber/high density polyethylene thermoplastic elastomer ~J ]. Journal of Industrial and Engineering Chemistry, 2013, 19(5)~ 1722 1729.
  • 6ZHANG X X, I.U C H, LIANG M. Properties of natural rubber vulcanizates containing mechanochemically devulcanized ground tire rubber[J]. Journal of Polymer Research, 2009, 16 (4) : 411-419.
  • 7BALASUBRAMANIAN M. Cure modeling and mechanical properties of counter rotating twin screw extruder devulcanized ground rubber tire-natural rubber blends [J]. Journal of Polymer Research, 2009, 16(2) : 133-141.
  • 8JIANC- G M, ZHAO S H, I.U() J Y, et al. Microbial desulfurization for NR ground rubber by thiobacillus ferrooxidans[J]. Journal of Applied Polymer Science, 2010, 116(5) = 2768-2774.
  • 9JEONG S O, ISAYEV A I. Continuous ultrasonic devulcanization of unfilled butadiene rubber ~J 1. Journal of Applied Polymer Science, 2004, 93(3).. 1166 1173.
  • 10LU Z X, ZHANG X X, TIAN D, et al. Mechanochemical preparation of devulcanized ground fluoroelastomers for the enhancement of the thermal stability of nitrile-butadiene rubber vulcanizates[J]. Journal o[ Applied Polymer Science, 2012, 126(4); 1351-1358.

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部