期刊文献+

先进制造系统的发展与故障诊断系统设计 被引量:2

Development of Advanced Manufacturing System and Design of Fault Diagnosis System
下载PDF
导出
摘要 围绕CIMS与FMS的研究与实践 ,先进制造系统的发展和应用取得了巨大的成就。论述了在这一发展历程中所取得的失败教训和成功经验 ,以及人的技能对故障诊断系统设计所具有的指导作用。同时结合CIMS及FMS的发展趋势 ,说明了新一代故障诊断系统应当坚持以“软”促硬、基于多A gent的智能集成。 Based on study and practice of CIMS and FMS, great achievement has been made in development of and application in advanced manufacturing system. The text discussed the lessons and successful experience realized in the development process, as well as the directive role of personal skill in fault diagnosis system. Meanwhile, by combining with the development trend of CIMS and FMS, the text explained that the new generation of fault diagnosis system should be in such principle as to promote hardware with software, integrate intelligence based on multi_agents, network remote service and green retainable development.
出处 《制造技术与机床》 CSCD 北大核心 2003年第1期30-33,共4页 Manufacturing Technology & Machine Tool
基金 航空基础科学基金资助项目 (99H531 53)
关键词 先进制造系统 CIMS FMS 故障诊断系统 设计 CIMS, FMS, Fault Diagnosis System
  • 相关文献

参考文献5

二级参考文献9

共引文献43

同被引文献21

  • 1许虹 唐任仲 程耀东.基于合弄制造原理的制造设备可重构技术[A]..第4届国际设计与制造前沿会议(ICFDM 2000)[C].中国杭州,2000-06.17-19.
  • 2Koren Y, Heisel U, Jovane F, et al. Reconfigurable manufacturing systems. Annals of the CIRP, 1999, 48(2):527-540.
  • 3Son Sung-yong. Design principles and methodologies for reconfigurable machining systems: [PhD Dissertation].Michigan: University of Michigan, 2000.
  • 4Mehrabi M G, Ulsoy A G, Koren Y. Reconfigurable manufacturing systems: Key to future manufacturing. Journal of Intelligent Manufacturing, 2000(11): 403-419.
  • 5Mehrabi M G, Ulsoy A G, Koren Y. Reconfigurable manufacturing systems and their enabling technologies. Int. J.Manufacturing Technology and Management, 2000, 1 (1):113-130.
  • 6Landers R G, Min B K, Koren Y. Reconfigurable machine tools. Annals of the CIRP, 2001, 50(1): 269-274.
  • 7Kuo Chung-Hsien. Resource allocation and performance evaluation of the reconfigurable manufacturing systems. In:2001 IEEE International Conference on Systems, Man, and Cybernetics (SMC 2001), vol.4, e-Systems and e-man for Cybernetics in Cyberspace, October 7-10, 2001, Tucson,Arizona, USA, 2001, 4: 2451-2456.
  • 8张根保.自动化制造系统[M].北京:机械工业出版社,2002..
  • 9刘衍平,李林.机械制造工艺过程的可靠性研究[J].机械设计,2000(8).
  • 10蒋平,郭波,张昆仑.机械制造的工艺可靠性研究综述[A],2010年全国机械行业可靠性技术学术交流会暨第四届可靠性工程分会第二次全体委员大会论文集[C],2010.

引证文献2

二级引证文献81

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部