期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

复合钎料的特点及研究现状 被引量：3

CHARACTERISTIC AND PRESENT SITUATION ON RESEARCH OF COMPOSITE BRAZING FILLER METAL
下载PDF
导出
摘要 为缓解钎焊接头的残余应力 ,人们提出了在普通钎料中加入一定体积比的作为增强相的各种形态的高温合金、碳纤维及陶瓷颗粒等形成复合钎料的方法。该钎料不仅具有较好的填缝能力 ,同时获得的钎缝接头具有良好的高温强度和抗冲击性能。 Composite brazing filler metal, which provided by adding super-alloys, carbon or ceramic particulates of certain volume ratio as wild phase to common brazing filler metal, was used to alleviated the welding residual stress. This kind of brazing filler metal had a good filling performance, at the same time, sound high-temperature strength and impact toughness can be obtained in the joint.
作者 吴京洧 杨建国 方洪渊
机构地区 哈尔滨工业大学
出处 《焊接》 2002年第12期10-14,共5页 Welding & Joining
关键词 研究现状 钎焊 复合钎料 陶瓷 brazing, composite brazing filler material, ceramic
分类号 TG425 [金属学及工艺—焊接]
  • 相关文献

参考文献15

  • 1Chasteen J W , Metzger G E . Brazing of hastello X with wide clearance butt joints. Welding Journal, 1979 ( 4 ): 111 s ～ 1 17s
  • 2Ho C T, Chung D D L. Carbon fiber reinforced tin - lead alloy as a low thermal expansion solder perform. J. Mater. Res. , 1990,5(6) :1266 ～ 1270
  • 3Andrew Cullison. Dissimilar materials joined by brazing. Weld ing Journal, 1999 (12) :49 ～ 50
  • 4Radzievskii V N, Baranova L V. Special features of formtion of a brazed jiont in wide gaps with a filler when vacuum brazing steel. Welding International, 1991,5 ( 4 ): 307 ～ 309
  • 5Ho C T. Carbon fiber - reinforced tin - lead alloy composites. J. Mater. Res. , 1994,9 ( 8 ): 2144 - 2147
  • 6Cao Jimin, Chung D D L. Carbon fiber silver - copper brazing filler composites for brazing ceramic. Welding Journal, 1992 ( 1 )
  • 7Zhu Minguang, Chung D D L. Improving the strength of brazed joints to alumina by adding carbon fibers. Journal of materials science, 1997,32 ( 20 ) :5321 ～ 5333
  • 8Zhu Minguang, Chung D D L. Active brazing alloy containing carbon fibers for metal - ceramic joining. Journal of American Ceramic Society, 1994,77 ( 10 ): 2712 ～ 2720
  • 9Zhu Minguang, Chung D D L. Carbon fiber silver - copper lami nate as a composite brazing material for metal - ceramic joining. Extended abstract and program -Biennial Conference on Carbon, 1991 (6) :298 ～ 299
  • 10Fang Hongyuan, Yang Jianguo, Wu Jingwei. The microstructureof Al2O3 joints brazed with A12O3 - particulate - contained composite Ag - Cu - Ti filler material. Proceedings of 2001 In- ternationgal Brazing & Soldering Conference ,2001 (10)

共引文献5

同被引文献21

  • 1胡志田,徐道荣.无铅软钎料的研究现状与展望[J].电子工艺技术,2005,26(3):125-128. 被引量：11
  • 2郭康富,康慧,曲平.无铅钎料开发研究现状[J].电子元件与材料,2006,25(2):1-3. 被引量：6
  • 3GUO F. Composite lead-free electronic solders[J]. J Mater Sci: Mater Electron, 2007,18 (1--3) :129-- 145.
  • 4SHAWN H PHILLIPS, TIMOTHY S HADDAD, SANDRA J TOMCZAK. Developments in nanoscience, polyhedral oligomeric silsesquioxane (POSS) polymers[J]. Solid State and Material Science, 2004,8(1) :21--29.
  • 5LI Gui-zhi, WANG Li-chang, NI Han li, et al. Polyhedral oligomeric silsesquioxane (POSS) polymers and copolymers: a review [J]. J Inorg Organomet Polym, 2001,11(3) :123-154.
  • 6LEE A, SUBRAMANIAN K N. Development of nano-composite lead free electronic solders[J]. Journal of Electronic Materials, 2005,34(11) :1399-- 1407.
  • 7BOWERS M T, ANDERSON S, BAKER E S, et al. 3-dimensional structure characterization of cationized polyhedral oligomeric silsesquioxanes (POSS) with styryl and phenethyl capping agents[J]. Int J Mass Speetrom, 2003,227(1):205--216.
  • 8ALBERTO FINA, DANIELA TABUANI, ALBERTO FRACHE, et al. Polypropylene-polyhedral oligomeric silsesquioxanes (POSS) nanocomposites[J]. Polymer, 2005,46(19) :7855-7866.
  • 9HUANG B, NING-CHEN LEE. Prospect of lead free alternativesfor reflow soldering[A]. 1999 International Symposium on Microeleetronics[C]. USA:SPIE-Int Soc Opt Eng, 1999. 711-- 721.
  • 10Suganuma K,Okamoto T,Koizum M.Method for preventing thermal expansion mismatch effect in ceramic-metal joining[J].J.Mater.Sci.Lett.,1985,4(5):648-650.

引证文献3

二级引证文献14

焊接
2002年 第12期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部