期刊文献+

钛铁试剂分光光度法连续测定陶瓷材料中的铁和钛 被引量:2

MEASUREMENT OF Fe AND Ti IN CERAMIC MATERIAL WITH Ti AND Fe REAGENT
下载PDF
导出
摘要 研究了钛、铁与钛铁试剂的显色反应。该分析方法的最大优点是可在同一溶液中用光度法连续测定样品中的钛和铁含量。配合物最大吸收波长分别为 41 0nm和 5 65nm ,二氧化钛含量在 0~ 2 0 0 μg/5 0ml,三氧化二铁含量在 0~ 3 0 0 μg/5 0ml范围内符合比尔定律。方法用于测定硅酸盐样品中钛和铁 。 The development reaction of Ti,Fe with reagent is researched,The most advantage of the method is that the content of Ti and Fe can be measured continuously with luminosity in the same solution.The most absorbing wavelength of the mixed material are 410 nm and 565nm respectively.It accords with the law when the content ranges of TiO\-2 are between 0~200μg /50m and that of Fe\-2O\-3 between 0~300μg/5oml. With the method the measurement results of Ti and Fe in silicate samples are satisfactory.
出处 《中国陶瓷》 CAS CSCD 2002年第6期42-43,16,共3页 China Ceramics
关键词 钛铁试剂 分光光度法 连续测定 陶瓷材料 luminosity method continuous measurement Ti and Fe
  • 相关文献

参考文献2

  • 1李硕等.GB/T4734-1996《陶瓷材料及制品化学分析方法》
  • 2《矿物岩石化学分析》.福建省地质中心实验室1973

同被引文献12

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部