STUDY ON THE TREATMENT OF 3—PHENOXY—BENZALDEHYDE INDUSTRIAL WASTEWATER WITH POLYMERIC ADSORBENT

In this paper,the two effluents from PBA (3-phenoxy-benzaldehyde) production process were treated by polymeric adsorbent CHA-111.PBA or PBC (3-phenoxy-benzoic acid) was recovered from the wastewater in the process of neutralization.As a secondary treatment method,adsorption with CHA-111 showed better efficiency than photocatolytic decomposition and solvent extraction.The optimal technological parameters were:adsorption:current velocity:2.0BV/hr(bed volume per hour),room temperature;desorption:current velocity:2.0BV/hr(bed volume per hour),room temperature;desorption:current velocity:1.0 BV/hr,80℃,8% sodium hydroxide aqueous solutions.In conclusion,99.9% COD in the neutralizing wastewater and 98.4% COD in the hydrolysis wastewater are removed successfully.

In this paper the two effluents from PBA (3- phenoxy -benzaldehyde) productionprocess were treated by polymeric adsorbent CHA-lll. PBA or PBC(3-phenoxybenzoic acid) was recovered from the wastewater in the process of neutralization. As asecondary treatment method, adsorption with CHA-lll showed better efficency thanPhotocatalytic decomposition and solvent extraction. The optimal technologicalparameters were: adsorption: current velocity: 2.0 BV/hr(bed volume per hour), roomtemperature, desorption: current velocity:10 BV/hr 80℃8% sodium hydroxideaqueous solutions. In conclusion, 90.9% COD in the neutralizing wastewater and98. 4% COD in the hydrolysis wastewater are removed successfully.