期刊文献+

Combustion and NO_x Emission Behavior of Chinese Coals 被引量:3

Combustion and NO_x Emission Behavior of Chinese Coals
下载PDF
导出
摘要 Seven Chinese coals ranking from anthracite to sub-bituminous fromthe Shanxi province were selected for study to forecast thecombustion and NO_x emission behavior. Three UK, one Indonesia andone South Africa coal was included in the study for reference. A flatflame-turbulent jet apparatus was employed to assess flame stability,ignition performance and NO_x emission behavior for the initial stageof devolatilization and combustion. This apparatus can simulateparticle heating rates, maximum temperatures and the influence of theturbulent Fluid interactions on the fate of volatiles. Seven Chinese coals ranking from anthracite to sub-bituminous from the Shanxi province were selected for study to forecast the combustion and NOx emission behavior.Three UK,one Indonesia and one South Africa coal was included in the study for reference.A flat flame-turbulent jet apparatus was employed to assess flame stability,ignition performance and NOx emission behavior for the initial stage of devolatilization and combustion. This apparatus can simulate particle heating rates,maximum temperatures and the influence of the turbulent fluid interactionson the fate of volatiles.To simulate processes occurring over longer residence time, additional devolatilization experiments were performed in a drop tube furnace.Char reactivity was studied through thermogravimetric analysis.Finally,fouling propensity was studied with the aid of a purpose-built laboratory combustor that enabled the characteristics of the ash deposit to be assessed empirically.The results show that Chinese coals do not appear to possess unusual features in respect of NOx formation,flame stability and ignition,char burnout and ash slagging.The range of coals available in China appears sufficiently broad that suits all requirements.In particular,Shenfu coal,with its initial fast devolatilization and nitrogen release rates and its low initial nitrogen content and high char reactivity,will perform well when fired in industrial boilers as far as NOx emission,flame stability and combustion efficiency are concerned.Pingshuo coal exhibits high char reactivity and an attractive slagging performance suggesting that this fuel represents a good compromise between NOx emission and overall plant efficiency.
出处 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2002年第3期333-338,共6页 中国化学工程学报(英文版)
关键词 DEVOLATILIZATION char reactivity SLAGGING NO_x 炭再生 X氧化排放 成渣 脱挥发份作用
  • 相关文献

参考文献8

  • 1Jain, R., Sundarajan, R., "Newmethod of calculating calorific wlues from elemental compositions of fossilfuels",Fuel, 60, 1079-1082 (1981).
  • 2Costa, M., Godoy, S., Lockwood, F. C., Zhou, J., "Initial stages of thedevolatilization of pulverized coal in a turbulent jet", Combustion and Flame, 96,150-162 (1994).
  • 3Abbas, T., Costa, M., Costen, P., Godoy, S., Lockwood, F.C., Ou, J. J.,Romo-Millares, C. , Zhou, J., "NOx formation and reduction mechanisms in pulverizedcoal flames",Fuel, 73, 1423-1436 (1994).
  • 4O'Connor, M., "The effect of coal quality on NOx emissions and carbon burnoutin pulverized coal fired utility boilers",ETSU Report, No. COAL R153 (1999).
  • 5Fu, W., Zhang, Y, Han, H., Wang, D., "A general model of pulverized coaldevolatilization", Fuel, 68, 505-510 (1989).
  • 6Fu, W. B., Zhang, E. Z., "A universal correlation betweenthe heterogeneousignition temperatures of coal char particles and coals", Combustion and Flame, 90,103-113(1992).
  • 7Fu, W. B., Zeng, T. F., "A general method for determining chemical kineticparameters during ignition of coal char particles", Combustion and Flame, 88, 413-424(1992).
  • 8Jackson, P. J. , Jones, A. R., "Controlled slagging and fouling trials in 500MW boilers firing individual coals", Engineering Foundation Conference on Slaggingand Fouling due to Impurities in Combustion Gases, Colorado, USA,July 29-August 3 (1984).

同被引文献4

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部