期刊文献+

改性纯丙乳液的制备 被引量:2

Preparation of Modified Pure Acrylic Emulsion
下载PDF
导出
摘要 采用丙烯酸酯类作为主单体 ,以甲基丙烯酸作为官能单体 ,通过单体配比 ,引发剂用量 ,乳化剂用量的选择 ,由种子乳液聚合法 ,得到了一种粘度适当 ,储存稳定性好的纯丙乳液 ; A pure acrylic emulsion with proper viscosity and good storage stability is prepared with acrylate-system as main monomers,and methyacrylic acid as functional monomer through the selection of the ratio of monomer,levels of initiator and emulsifieing by using the method of seeding polymerzation.The effects of different synthesis processes and polymerizating condition on emulison property are discussed.
出处 《湖南工程学院学报(自然科学版)》 2002年第4期63-65,68,共4页 Journal of Hunan Institute of Engineering(Natural Science Edition)
关键词 制备 纯丙乳液 乳液聚合 乳胶漆 性能检测 丙烯酯酯 甲基丙烯酸 水性涂料 pure acrylic emulsion emulsion polymerization latex paint properties
  • 相关文献

参考文献6

二级参考文献6

共引文献65

同被引文献18

  • 1徐峰,朱晓波,邹侯招. 建筑涂料实用技术大全[M]. 北京:化学工业出版社,2003:703-715.
  • 2耿耀宗,曹同玉. 合成聚合物乳液制造与应用技术[M]. 北京:中国轻工业出版社,1996:54-55.
  • 3王威岗,韦杰,董长青.木质纤维热解的热重和反应动力学研究[J].可再生能源,2007,25(5):23-26. 被引量:16
  • 4Roumeli E, Papadopoulou E, Pavlidou E, et al. Synthesis, char- acterization and thermal analysis of urea-formaldehyde/nano SiO2 resins [ J ].Thermochimica Acta, 2012 ( 527 ) : 33- 39.
  • 5Gao Z H, Wang X M, Wan H, et al.Curing characteristics of u- rea-formaldehyde resin in the presence of various amounts of wood extracts and catalysts [ J ]. Journal of Applied Polymer Science, 2008, 107(3) : 1555-1562.
  • 6储富祥,王春鹏,金铁铃,等.三聚氰胺甲醛模塑料的制备方法:中国,200910033562.5[P],2009-06-23.
  • 7Martin Kohlmay, Gerhard Zuckerstatter, Andreas Kandelbauer. Modification of melamine-formaldehyde resins by substances from renewable resources [ J ]. Journal of Applied Polymer Science, 2012, 124(6) :4416-4423.
  • 8詹茂盛,董绪超,肖和平,等.一种新型低收缩率氨基模塑料及其制备方法:中国,201010186569.3[P],2010-05-12.
  • 9Suzana Samaja-Jovanovi6,Vojislav Jovanovic,Sandra Konstantinovi, et al. Thermal behavior of modified urea-formaldehyde resins [ J ]. J Therm Anal Calofim,2011,104(3) :1159-1166.
  • 10Liu J, Nan J Y, Wang C P, et al. Orthogonal experimental study on moulding conditions of amino moulding plastic [ J ]. Advanced Materials Research, 2014,900: 596-600.

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部