海上油田生产辅助平台生产运行探索
摘要
本文以歧口17-2油田PAPB生产辅助平台生产流程为背景,对其运行过程中出现的一系列问题予以讨论:如天然气不能够直接供给油田用户、化学药剂系统容易出现腐蚀、化学药剂系统淡水消耗量大、注水泵启动时振动大等问题。针对这些在运行过程中出现的实际问题进行了原因分析和风险分析,并根据具体情况提出了相应的措施,为其它类似生产平台运行管理提供了技术经验。
出处
《中国石油和化工标准与质量》
2018年第20期33-34,共2页
China Petroleum and Chemical Standard and Quality
二级参考文献29
-
1那成烈.三角槽节流口面积的计算[J].甘肃工业大学学报,1993,19(2):45-48. 被引量:22
-
2郭卫东,王占林.斜盘式轴向柱塞泵实际流量的分析研究[J].北京航空航天大学学报,1996,22(2):223-227. 被引量:16
-
3KOJIMA E, NAGAKURA H. Characteristics of fluid- borne noise generated by fluid power pumps[J]. Bulletin of the JSME (The 1st Mechanism of Generation of Pressure Pulsation in Axial Piston Pump), 1982, 25(199): 46-53.
-
4ZAICHENKO I Z, BOLTYANSKII A D. Reducing noise levels of axial piston pumps[J]. Russ Engine Journal, 1969, 49(4): 21-23.
-
5YAMAUCHI K, YMAMOTO T. Noise generated by hydraulic pump and their control method[R].Tokyo: Mitsubishi Heavy Industries Technical Report, 1975.
-
6BOWNS D E, TOMLINSON S P, DOREY R E. Computer simulation techniques for the dynamic performance assessment of fluid power systems[C]// The 7th International Fluid Power Symposium, Sep. 16-18, Bath, UK, 1986: 81-88.
-
7BOWNS D E, EDGE K A, CADLISH D. Factors affecting the choice of a standard method for the determination of pump pressure ripple[C]///MechE Conference Quiet Oil Hydraulic Systems, Oct., London, UK, 1980: 141-148.
-
8EDGE K A, WING T J. Measurement of the fluid borne pressure ripple characteristics of hydraulic components[J]. Proceedings of the Institution of Mechanical Engineers, Part B- Management and Engineering Manufacturing, 1983, 197(B): 247-254.
-
9EDGE K A, FREITAS F J T. Study of pressure fluctuations in the suction lines of positive displacement pumps[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Management and Engineering Manufacturing, 1985, 199(B4):211-217.
-
10EDGE K A, JOHNSTON D N. The secondary source method for the measurement of pump pressure ripple characteristics 2: Experimental results[J]. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power and Energy, 1990, 204 (1): 41-46.
共引文献50
-
1蒋幸幸.直轴式液压轴向柱塞泵配流机构优化设计分析[J].武汉工程职业技术学院学报,2009,21(4):17-19.
-
2De-sheng WEN,Zhi-li WANG,Jun GAO,Yong ZHANG,Shi-jun LV,Tetsuhiro TSUKIJI.Output speed and flow of double-acting double-stator multi-pumps and multi-motors[J].Journal of Zhejiang University-Science A(Applied Physics & Engineering),2011,12(4):301-309. 被引量:23
-
3邵立南,杨晓松.我国有色金属冶炼废水处理的研究现状和发展趋势[J].有色金属工程,2011,1(4):39-42. 被引量:16
-
4冀宏,张立升,王峥嵘,王金林.电动液压动力单元的一体化演变[J].机床与液压,2011,39(19):117-120. 被引量:18
-
5蒋幸幸.直轴式液压轴向柱塞泵配流机构优化设计与分析[J].机床与液压,2011,39(21):112-114. 被引量:1
-
6杨阳,权龙,杨敬.轴向柱塞泵非止点配流窗口过渡区压力脉动特性分析[J].机械工程学报,2011,47(24):128-134. 被引量:22
-
7刘新福,綦耀光,吴建军,郭本广,孟尚志.煤层气井有杆泵设备泵阀运动规律和开启条件[J].煤炭学报,2012,37(5):810-814. 被引量:9
-
8毛学庆,刘李送.利用仿形装置粗加工HDS车轮[J].马钢科研,2000(1):23-27.
-
9冀宏,王洋.轴向柱塞泵工作腔吸油气穴数值解析[J].兰州理工大学学报,2013,39(3):34-37. 被引量:13
-
10佟强.有色金属冶炼废水处理的研究现状和发展趋势[J].中国化工贸易,2013,5(9):250-250. 被引量:1
-
1李龙冬,王坤,崔祥,林小飞.北疆地区天然气供应情况统计分析[J].价值工程,2019,38(7):43-45.
-
2文志飞,王朝阳,刘辉龙,薄景富,杜娟.半潜式生产平台泰山吊合拢方案设计[J].石化技术,2019,26(2):22-24. 被引量:6
-
3林文俊,谢健,陈世品,苏小青.闽楠大苗新培育技术苗木生长性状分析[J].现代农业研究,2019,25(2):52-53. 被引量:2
-
4黄萍萍.新媒体视域下新闻传播学人才培养矛盾及其解决路径[J].今传媒,2019,27(1):127-128. 被引量:1
-
5张明军.雷击对光伏发电系统的危害及防范[J].农村电工,2019,27(1):38-38. 被引量:1
-
6周敬章,朱云,唐子翔.电视台全媒体融合平台升级设计与实践[J].视听,2019(3):244-245. 被引量:2