摘要
混合制冷剂(MR)组分是影响天然气液化流程性能的最重要因素之一。在某些特定的液化天然气(LNG)装置中,丁烷和戊烷等重组分不受欢迎。研究了以下4种混合制冷剂组分用于单混合制冷剂(SMR)流程的效果:含有异丁烷(C4)和异戊烷(C5)的MR;不含C4的MR;不含C5的MR;不含C4和C5的MR。对各流程的比功耗进行了对比。结果表明,相比于异丁烷,异戊烷对降低能耗的贡献更大;另外,工况1的能耗比工况4低18%。更进一步地,提出了采用不同制冷剂进行预冷的SMR流程。对于工况4,采用丙烷预冷的流程能耗可降低12%。
Mixed refrigerant(MR)component is one of the most important factors that influence the performance of natural gas liquefaction process.In certain kinds of liquefied natural gas(LNG)plants,heavy hydrocarbons in MR,such as butane and pentane,are not welcome.In this paper,four kinds of MR components have been used in the single mixed refrigerant(SMR)process:MR with both i-butane(C4)and i-pentane(C5);MR without C4;MR without C5;MR without C4 and C5.The specific power consumption has been compared.The results show that compared with i-butane,i-pentane has greater contribution to the decline of power consumption and that the power required in condition 1is 18% less than that in condition 4.Furthermore,the SMR liquefaction processes with different pre-cooling refrigerants have been proposed.Compared with condition 4,there is a 12% decline in power consumption for the process with propane pre-cooling.
出处
《化工学报》
EI
CAS
CSCD
北大核心
2015年第S2期379-386,共8页
CIESC Journal
关键词
天然气
碳氢化合物
模拟
混合制冷剂
能耗
液化流程
natural gas
hydrocarbons
simulation
mixed refrigerant
power consumption
liquefaction process