期刊文献+

孔口分布及空气流速对充氧性能的影响 被引量:1

Influence of orifice distribution and air velocity on oxygenation performance
原文传递
导出
摘要 实验采用鼓风曝气,改变曝气量,研究孔口分布及空气流速对清水充氧性能的影响。通过考察氧总转移系数KLa(20)、充氧能力N0和氧转移效率E3项指标,得出该曝气设备的最佳运行条件:在曝气量为9 m3/h时,选用曝气器B进行曝气。这样可以得到较高的KLa(20)(1.816 h-1)、N0(0.105 kg/h)和E(4.151%),为曝气设备的实际应用提供参考。 The influence of orifice distribution and air velocity on rinsing oxygenation performance was studied by adopting blast aeration and changing gas flow. The test focused on investigating the following three indicators,the oxygen transfer coefficient KLa(20),oxygenation capacity N0 and oxygen transfer efficiency E. The results show that the optimal operating condition of the aeration equipment is aerating under the gas flow of 9 m3/h and choosting the aeration pipe B. In this case,the higher KLa(20)(1.816 h-1),N0(0.105 kg/h) and E(4. 151%) can be obtained,which provides a reference for the practical application of aeration equipment.
出处 《环境工程学报》 CAS CSCD 北大核心 2014年第8期3195-3200,共6页 Chinese Journal of Environmental Engineering
基金 国家"水体污染控制与治理"科技重大专项(2011ZX07301-003-05)
关键词 曝气量 孔口分布 空气流速 氧总转移系数 充氧能力 氧转移效率 gas flow orifice distribution air velocity oxygen transfer coefficient oxygenation capacity oxygen transfer efficiency
  • 相关文献

同被引文献15

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部