摘要
A self-designed experimental device was employed to simulate the pyrolytic dismantling process of selected electronic wastes(E-wastes), including printed wiring boards(PWBs)and plastic casings. The generated particulate matter(PM) of different particle sizes, carbon monoxide(CO) and carbon dioxide(CO_2) were determined, and the corresponding emission factors(EFs) were estimated. Finer particles with particle sizes of 0.4–2.1 μm accounted for78.9% and 89.3% of PM emitted by the pyrolytic processing of PWBs and plastic casings,respectively, and the corresponding EFs were 9.68 ± 4.81 and 18.49 ± 7.2 g/kg, respectively.The EFs of CO and CO_2 from PWBs and plastic casings were 55.9 ± 26.9 and 1182 ± 439 g/kg,and 133.6 ± 34.6 and 2827 ± 276 g/kg, respectively. Compared with other emission sources,such as coal, biomass, and traffic exhaust, the EFs of E-wastes were relatively higher,especially for PM. There were significant positive correlations(p < 0.05) of the initial contents of carbon and nitrogen in PWBs with the related EFs of PM, CO, and CO_2, while the correlations for plastic casings were insignificant. The EFs of CO of PWBs were significantly positively correlated with the corresponding EFs of PM and the parent polycyclic aromatic hydrocarbons(PAHs); however, the same result was not observed for plastic casings.
A self-designed experimental device was employed to simulate the pyrolytic dismantling process of selected electronic wastes(E-wastes), including printed wiring boards(PWBs)and plastic casings. The generated particulate matter(PM) of different particle sizes, carbon monoxide(CO) and carbon dioxide(CO_2) were determined, and the corresponding emission factors(EFs) were estimated. Finer particles with particle sizes of 0.4–2.1 μm accounted for78.9% and 89.3% of PM emitted by the pyrolytic processing of PWBs and plastic casings,respectively, and the corresponding EFs were 9.68 ± 4.81 and 18.49 ± 7.2 g/kg, respectively.The EFs of CO and CO_2 from PWBs and plastic casings were 55.9 ± 26.9 and 1182 ± 439 g/kg,and 133.6 ± 34.6 and 2827 ± 276 g/kg, respectively. Compared with other emission sources,such as coal, biomass, and traffic exhaust, the EFs of E-wastes were relatively higher,especially for PM. There were significant positive correlations(p < 0.05) of the initial contents of carbon and nitrogen in PWBs with the related EFs of PM, CO, and CO_2, while the correlations for plastic casings were insignificant. The EFs of CO of PWBs were significantly positively correlated with the corresponding EFs of PM and the parent polycyclic aromatic hydrocarbons(PAHs); however, the same result was not observed for plastic casings.
基金
supported by the Natural Science Foundation Committee of China(No.41390240)
the National Basic Research Program of China(No.2014CB441101)
