摘要
采用浸渍法制备了一系列以成型TiO2为载体的Mn-Co/TiO2低温SCR催化剂,研究分析了活性组分担载量、Mn含量、焙烧温度、焙烧时间等制备参数和进口NO浓度、空速、O2体积分数、NH3/N2摩尔比等操作条件对催化剂脱硝反应活性的影响.结果表明:活性组分担载量为30%,Mn/(Mn+Co)摩尔比为80%,在500℃下焙烧6 h得到的Mn-Co/TiO2催化剂具有较高的NO转化率;在进口NO浓度为600×10-6、O2体积分数6%、空速10000 h-1、150℃条件下,NO脱除率接近100%.
Mn-Co /TiO2 catalysts using TiO2 as supported material were prepared by a simple impregnation process. The effect of calcination conditions, loading amount of active components,molar ratio of Mn /( Mn + Ce),concentrations of NO and O2,NH3 / NO ratio and space velocity on catalytic performance of denitration were studied. The results showed that the as-prepared Mn-Co / TiO2 catalysts have excellent catalytic activity at low temperature. The samples with active ingredient loading amount of 30% and Mn /( Mn+Co) molar ratio of 80% exhibit the best result of denitration when calcinated at 500 ℃ for 6 h. The value of n( NH3) /n( NO) of such samples is nearly 1. 0 under test condition of NO in feed 600×10-6,GHSV of 10000 h-1,and φ( O 2) = 6% at 150 ℃.
出处
《环境科学学报》
CAS
CSCD
北大核心
2014年第4期849-856,共8页
Acta Scientiae Circumstantiae
基金
国家科技支撑计划资助项目(No.2013BAC13B01
2011BAC29B01)~~