期刊文献+

聚丙烯装置节能降耗与改进措施 被引量:4

The technical improvement for energy-saving and consumption reduction in PP plant
下载PDF
导出
摘要 针对海蒙特本体聚合工艺特点,对70 kt/a聚丙烯装置能耗、物耗现状进行了分析。在节能方面,通过停运部分机泵、调整料仓风机输送和掺混时间,充分利用装置蒸汽冷凝液作为热源代替部分蒸汽,并通过正交试验确定大小闪蒸线和干燥器的蒸汽最佳用量,使装置能耗由6.615 GJ/t下降到6.339GJ/t。在降耗方面,通过回收尾气、增设氮气洗涤塔缓冲罐和备用丙烯过滤器等一系列技术改造,使丙烯单耗由1.036 t/t下降到1.020 t/t。 In accordance with the characteristics of Himont polypropylene (PP) process,the current status of consumption of energy and feed stock in a 70 kt/a PP plant was analyzed. The energy consumption of the PP plant was reduced from 6.615 GJ/t to 6.339 GJ/t with taking the technical measures, including stopping the idle motor pumps, adjusting the operating hours of air charging machine in hopper box and mixing unit, fully utilizing the condensation heat for replacing part of the steam as heat source and optimizing the steam consumption in the flashing units and dryer by means of the orthogonal experiment.The propylen econsumption was lowered from 1.036 t/t to 1.020 t/t through a series of technical innovations such as recovering exhaust gas and setting up an extra buffer container for nitrogen scrubbing and a spare filter for propylene.
作者 贺凌滨
出处 《合成树脂及塑料》 CAS 2003年第1期31-35,共5页 China Synthetic Resin and Plastics
关键词 聚丙烯装置 节能降耗 本体聚合 技术改造 polypropylene bulk polymerization energy-saving and consumption -reduction technical innovation
  • 相关文献

同被引文献35

引证文献4

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部