摘要
根据工程岩体地质模型的几何特征 ,从三维可视化构模角度 ,将工程岩体分为连续型 (非倒转褶皱 )、非连续型 (非倒转褶皱 )与倒转褶皱 3大类 ,在此基础上开发了工程岩体三维可视化构模系统。该系统由建模分析、通用工具与数据库 3部分组成。介绍了 3类工程岩体的构模方法 ,形成了面向对象的模型类。最后 。
Based on the geometric characters of engineering rockmass, it was divided into three basic types as continuous rockmass (non-overturned fold), non-continuous rockmass (non-overturned fold) and overturned fold rock mass in the view of 3D visual modeling, and a 3D visual modeling system of engineering rock masses was developed. This system includes modeling analysis, general tools and databases. The modeling methods for the above-mentioned three kinds of engineering rockmass were introduced, and the object-oriented modeling classes were established. Through 3D visual modeling of the north slope in West Fushun Open-Pit Mine, the function of this modeling system was checked.
出处
《中国矿业大学学报》
EI
CAS
CSCD
北大核心
2003年第1期38-43,共6页
Journal of China University of Mining & Technology
基金
国家杰出青年基金资助项目 ( 5 982 5 114 )
关键词
工程岩体
三维构模
可视化
数据库
倒转褶皱
engineering rockmass, 3D modeling, visualization, system development