期刊文献+

π网络法测量晶体频率的误差分析及校正 被引量:1

Error analysis and calibration of the crystal frequency measurement by π-network method
下载PDF
导出
摘要 石英晶体谐振频率是石英晶体的重要电参数之一。为精确测量石英晶体的谐振频率,根据石英晶体的电模型及π网络法石英晶体测量系统中π网络的理论模型和实际模型的差异分析了影响石英晶体谐振频率测量精度的因素,并在此基础上提出了校正方法。实验结果表明,经过校正后石英晶体谐振频率的测量精度可达到±2×10-6。 Resonance frequency is one of the important electric parameters of quartz crystal. On the basis of the characteristics of the quartz crystal unit and the difference between the theoretical model and the realistic equivalent circuit in the π network measurement system of the quartz crystal unit, the factors affecting the measurement accuracy are analyzed to obtain the resonance frequency accurately. And the compensating method is put forward. The experiment shows that the method is effective and the accuracy of measurement is ±2×10-6.
出处 《北京机械工业学院学报》 2002年第4期16-20,共5页 Journal of Beijing Institute of Machinery
基金 北京市教委科技发展基金项目 [2 0 0 0KJ-0 52 ]
关键词 石英晶体谐振器 π网络法 测量 晶体频率 误差分析 π-network quartz crystal error analysis
  • 相关文献

参考文献4

  • 1薛国富,任丽华.石英晶体元件参数的测量方法[J].压电晶体技术,1996(2):43-51. 被引量:7
  • 2中华人民共和国电子工业推荐性部标准.用π型网络零相位法测量石英晶体元件参数[S].1989.
  • 3IEC444- 1973. Basic method for the measurement of resonance frequency and equivalent series resistance of quartz crystal units by zero phase technique in a π-network[S]. 1973.
  • 4许开君,李忠波.模拟电子技术[M].北京:北京机械工业出版社,1996.

共引文献6

同被引文献2

  • 1Analog Devices Inc. AD9852 Datasheet, 2002.
  • 2Analog Devices Inc. AD8302 Datasheet, 2002.

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部