期刊文献+

烧结过程铁精矿的合适品位 被引量:1

Study on Optimum Grade of Iron Concentrates for Sintering
下载PDF
导出
摘要 对超级铁精矿和普通铁精矿烧结矿显微组织研究证明:随着品位的提高,烧结矿中硅酸盐和铁酸盐粘结相大幅度降低,被粘结相整个包裹的磁铁矿和浮士体晶粒减少。为表征这种特性,提出一个具体公式。超级精矿烧结矿显微组织接近球团矿,强度较普通烧结矿和球团矿差。过细的超级精矿粉导致烧结设备生产率降低。精矿适宜选矿上限为65%—66%。 The microscopic study conducted on sinters from both super-grade and com-mon-use iron concentrates indicated that with the higher grade used the cohe-aive--phase silicates ferrites will depress markedly in sinters and the magne-tite wustite grains embraced in cohesive phase decrease.A numerical equationis therefore given to characterize the properties. It is found that the sinterfrom super-grade concentrates is similar to that of pellets in microstructure,but is lower in strength than common-use sinters and pellets. A highst gradeof 65% --66% concentrate is recommended for sintering since the extrafine su-per-grade tends to the reduction in productivity of sintering machine.
作者 余琨
出处 《东北工学院学报》 CSCD 1992年第2期128-133,共6页
关键词 烧结矿 铁精矿 超级精矿 品位 sinter iron concentrate super-grade iron concentrate agglomerate structure
  • 相关文献

同被引文献3

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部