期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

铁氧体与金属玻璃脉冲磁性能比较 被引量：4

Magnet performance comparison between ferriteand amorphous under pulse condition
下载PDF
导出
摘要 　简要介绍了在直线感应加速器(LIA)中对所用磁性材料的要求,列举了国外在LIA中使用金属玻璃(非晶磁性材料)替代铁氧体磁环的实例。在非晶和铁氧体磁环静态磁性能测试的基础上,对两种材料的脉冲性能做了深入研究,实验研究表明在脉冲状态下,两者的饱和磁密均远大于静态饱和磁密。这一现象对实际应用很有价值。 The requirements of magnetic material in linac induction accelerator and the characteristics of amorphous and ferrite are described briefly in this paper. Some instances about using amorphous to replace ferrite material are reviewed in the paper too. Experimentations are carried out under static condition, in additional more researches are done based on pulse condition. It is concluded that both materials have higher satutration magnetic density under pulse condition than under static condition.
作者 程皓 章林文 叶毅 程念安
机构地区 中国工程物理研究院流体物理研究所
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2002年第6期941-944,共4页 High Power Laser and Particle Beams
关键词 非晶材料 铁氧体 直线感应加速器 金属玻璃 脉冲磁性能 磁性材料 amorphous ferrite linac induction accelerator (LIA)
分类号 TL53 [核科学技术—核技术及应用] TL503.8 [核科学技术—核技术及应用]
  • 相关文献

参考文献4

  • 1Mamaev G, Bolotin I, Ctcherbakov A, et al. Technology for production of amorphous alloy large scale cores[A]. Proc of the 1997 Particle Accelerator Conference[C]. Vancouver,British Columbia, Canada, 1997. 1313-1315.
  • 2Bolotin I, Mamaev G, Mamaev S, et al. Influence of the technological process conditions to parameters of magnetic cores from ribbon amorphous alloys[A]. Proc of the 1999 Particle Accelerator Conference[C]. New York,1999. 1482-1484.
  • 3Molvik A W, Meier W R, Moir R W, et al. Implication of new induction core materials and coatings for high power induction accelerators[A]. Proc of the 1999 Particle Accelerator Conference[C]. New York, 1999. 1503-1505.
  • 4Waldron W L, Reginato L L. Design and performance of the DARTH second axis induction cells and drivers[A]. Proceedings of the 10th International Linac Conference[C]. Monterey, California, USA,2000,TUB07.

同被引文献14

  • 1陈思富,李欣,黄子平,石金水,丁亨松,李洪,马冰,王华岑,叶毅,谷占军,郑容峰,王莉萍,章林文,邓建军.Feasibility of Applying Home-Made Amorphous Core to Induction Module[J].Chinese Physics C,2008,32(z1):187-190. 被引量：4
  • 2李健民,孙文声,全明秀,胡壮麒,王永忠,乔桂文.（Fe_（0．99）Mo_（0．01））_（78）Si_9B_（13）非晶合金的低温韧脆性研究[J].金属学报,1995,31(11). 被引量：2
  • 3梁天学,孙凤举,曾江涛,尹佳辉,丛培天,孙剑峰,陈玉兰,张众,杨海亮.LTD用磁芯材料磁化特性实验研究[J].强激光与粒子束,2007,19(6):1023-1026. 被引量：12
  • 4Lim S H,Noh T H,Bae Y J,et al.The magnetic properties of Fe-based amorphous ribbons coated with various oxides using the sol-gel process[J].Journal of Materials Science,1997,32:3219-3225.
  • 5Sharma A,Acharya S,Vijayan T,et al.High-frequency characterization of an amorphous magnetic material and its use in an induction adder configuration[J].IEEE Trans on Magnetics,2003,39(2):1040-1045.
  • 6Vizir V A,Maksimenko A D,Manylov V I,et al.Submicrosecond pulsed high-power transformer magnetic cores[C]//13th Symposium on High Current Electronics.2004.
  • 7丛培天,邱爱慈,杨海亮,等.3MV感应电压叠加器的磁感应腔研制[C]//第十一届高功率粒子束学术交流会.2008.
  • 8Sharma A,Acharya S,Vijayan T, et al. High frequency characterization of an amorphous magnetic material and its use in an induction adder configurationEJ. IEEE Trams on Magnetics, 9:003,39(2) : 1040-1045.
  • 9Ashby S,Drury D,James G,et al. CLIA A compact linear induction accelerator systemFC//8th IEEE International Pulsed Power Confer encc. 1991:940 942.
  • 10Molvik A W, Meier W R,Moir R W, et al. Implications of new induction core materials and coatings for high power induction accelerators EC//Proceedings of the 1999 Particle Accelerator Conference. 1999: 1503-1505.

引证文献4

二级引证文献8

强激光与粒子束
2002年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部