虚拟样机成为开发新型低压电器的关键技术
被引量:1
Virtual Prototype to be A Key Technique for Development of New Low-Voltage Apparatus
摘要
计算机可视化仿真技术的发展,人们可以在计算机内建立一个虚拟样机,而代替传统的反复进行实际样机制造和试验的开发过程,大幅度缩短开发周期和节约开发成本,并实现优化设计,本文介绍这种技术在低压电器中的应用.
出处
《上海电器技术》
2002年第4期3-8,共6页
Shanghai Electric Appliance Technology
参考文献5
-
1F.Barcikowski,M.Lindmayer:Simulations of the Heat Balance in Low-voltage Swichgear,20^th International Conference on Electrical Contacts,Sweden,2000
-
2Thomas Danbe,Hartwig Stammberger,Michael Anheuser,Carsten Dehning:3D Simulation of a Low Voltage Switching Arc Based on MHD Equations,9^th International Conference on "Switchig Arc phenomena",Poland 2001
-
3F.Karetta,M.Lindmayer:Simulation of Arc Motion between Divergent Arc Runners,19^th International Conference on Electric Contact Phenomena,Germany,1998
-
4村田等.接触器的仿真技术[J].富士时报,2000,73.
-
5ADAMS,ANSYS等软件使用说明书
同被引文献7
-
1连理枝.低压断路器及应用[M].北京:中国电力出版社,2002.
-
2Aman Gupta, Bala Ram. Integrating Human Performance into Discrete-Event Simulation Models for Manufacturing:A Survey[ C]. Proceedings of FAIM2004 ,Toronto, Canada,July 12 - 14,2004 : 1014 - 1017.
-
3Barcikowski F, Lindmayer M. Simulations of the heat balance in low-voltage swichgear [ C ]. 202 international conference on electrical contacts, Sweden,2000.
-
4Ahn K Y, Kim S H. Modeling and analysis of a highspeed circuit breaker mechanism with a sprlng-actuated cam[ J ]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2001,215 ( 6 ) : 663 - 672.
-
5Wehmann K D, Huber E, Frohlich K. Arc memory effect on postarc current in vacuum circuit breaker simulation and experiment [ C ]. International Symposium on Discharges and Electrical Insulation in Vacuum, IEEE, Piscataway, N J, USA, 1998:545 - 548.
-
6Wang Xiao-hua, Yang Wu, Rong Ming-zhe. Simulation and analysis of high voltage circuit breaker's mechanism dynamical characteristic [ C ]. Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 06 - 10 Oct. , Asia Pacific2002: 1774 - 1777.
-
7张越今,宋健.多体动力学仿真软件 ADAMS 理论及应用研讨[J].机械科学与技术,1997,16(5):753-758. 被引量:54
-
1陈德桂.虚拟样机成为开发新型低压电器的关键技术[J].低压电器,2002(6):3-7. 被引量:38
-
2朱军,陈嘉福,戴勇.集成滤波电感整流变压器的研究[J].变压器,2016,53(11):6-11. 被引量:1
-
3沈玉琢.计算机辅助设计在低压电器产品上的应用[J].电工技术杂志,1995(6):22-24.
-
4戴勇,朱军,郑宜锋,韦文武.大型船用感应推进电机设计[J].船电技术,2016,36(3):16-19. 被引量:1
-
5付银仓,景海航,王洪林.中高频小电感空心电抗器的设计[J].电力电容器与无功补偿,2015,36(3):77-80. 被引量:2
-
6张文禄.钨电极材料对电弧性能的影响[J].稀有金属与硬质合金,1997,25(1):60-62. 被引量:3
-
7黄国飞,刘斌,王新营,党朋,曾伟,郑秋.碳纤维复合芯及其导线标准创新成果[J].中国科技成果,2013(14):78-78.
-
8徐定旺,王秀和,董兴华.高速永磁同步风力发电机的设计研究[J].微特电机,2016,44(8):15-18. 被引量:1
-
9周浩,邓旭,王东举,沈扬,陈锡磊,孙可.±1100kV特高压直流换流站绝缘配合关键问题研究[J].高电压技术,2013,39(12):3015-3021. 被引量:22
-
10陈绍杰.复合材料与风机叶片[J].高科技纤维与应用,2007,32(3):8-12. 被引量:20