期刊文献+

浅谈液氯液化器的设计

A BRIEF TALK ON THE DESIGN OF LIQUID CHLORINE LIQUIDATION APPARATUS
下载PDF
导出
摘要 液氯液化器是一台冷凝设备,管程介质为低温盐水(t≤-26℃),壳程介质为氯气,属于三类压力容器。其管程尽管属于低温低应力工况,但为了安全,在设计选材、结构设计以及制造、检验、验收等方面仍按低温换热器的要求。 The liquid chlorine liquidation apparatus is a condensation equipment. The tube side medium is low temperature salt water (t≤ -26℃). The shell side medium is chlorine gas. The apparatus belongs to Ⅲ category pressure vessel. According to the design pressure, although it belongs to low temperature low stress working condition but for the sake of safety, the design material selection. , structure design, manufacture, inspection and acceptance etc. Should conform to the requirement of Ⅲ category pressure vessel.
作者 刘月芹
出处 《石油化工设备技术》 CAS 2003年第1期16-19,共4页 Petrochemical Equipment Technology
关键词 液氯 液化器 设计 压力容器 低温低应力工况 设计 选材 制造检验 Liquid chlorine liquidation apparatus,Ⅲ category pressure vessel, Low temperature low stress working condition, Design material selection, Structure design, Manufacture and inspection
  • 相关文献

参考文献12

  • 1GB151-1991.管壳式换热器[S].[S].,..
  • 2GB 151-1999附录A低温管壳式换热器[S].
  • 3HG 20585-1998钢制低温压力容器设计规定[S].
  • 4GB 150-1998附录C低温压力容器[S].
  • 5HG 20660-1991压力容器中化学介质毒性危害和爆炸危险程度分类[S].
  • 6GB150-1998.钢制压力容器[S].[S].,..
  • 7HG20581-1998.钢制化工容器材料选用规定[S].[S].,..
  • 8JB4726-2000.压力容器用碳素钢和低合金钢锻件[S].[S].,..
  • 9GB/T 8163-1999流体输送用无缝钢管[S].
  • 10JB 4727-2000,低温压力容器用低合金钢锻件[S].

共引文献662

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部