期刊文献+

Al-Mg合金的解理与沿晶断裂 被引量:3

Cleavage and Intergranular Fracture in Al-Mg Alloys
下载PDF
导出
摘要 研究了化学成分和拉伸条件对Al-Mg合金的断裂行为的影响.结果表明,钠含量对合金的拉伸性能和断裂行为有显著的影响.含钠量较高的合金显示出很低的延伸率,而钠含量较低的合金具有很高的延伸率.断口观察表明,含纳量较高的合金发生脆性断裂,断口为解理和沿晶混合型.而钠含量较高的合金发生韧性断裂,断口为韧窝型.在所研究的范围内,镁对合金断裂行为的影响不大,钠是导致合金发生脆性断裂的原因. Tensile fracture behavior of Al-Mg alloys with different chemical composition were studied in this paper. The alloy with high Na content exhibited very low tensile elongation,while the alloys with low Na content exhibited high tensile elongation. Fracture observation showed that the alloy exhibited brittle fracture with intergranular section and cleavage facet. Whereas the alloy with low Na content exhibited ductile fracture with dimples. Mg content did not affect the fracture behavior of the alloys. The element Na is the reason of brittle fracture of the alloy.
出处 《材料科学与工艺》 EI CAS CSCD 2002年第4期391-394,共4页 Materials Science and Technology
基金 黑龙江省自然科学基金资助项目(982290-044)
关键词 AL-MG合金 解理 沿晶断裂 铝镁合金 力学性能 Al-Mg alloys cleavage intergranular fracture
  • 相关文献

参考文献5

  • 1JIANG D, WANG Y, HONG B D, et al. Cleavage fracture in an Al -Li alloy 8090[ J]. Journal of Materi als Science Letters. 1996, 15: 1597 - 1600.
  • 2HIGASHI K, OHNISHI T, NAGATANI Y, et al. Ener gy dispersion spectroscopy of pre - existing hydrogen embrittled zone ahead of stress corrosion cracks [J]. Journal of Japanese Institute Light Metals. 1981, 31: 386 ~ 412.
  • 3OKADA H, KANNO M. Suppression of high temperature embrittlement of Al -5% Mg alloys containing a trace of sodium caused by antimony addition [ J ]. Scrip ta Materialia. 1997, 37:78 ~80.
  • 4HORIKAVA K, KURAMOTO S, KANNO M. Effect of traces Calcium and strontium on hot ductility of an Al 5.5mol%Mg alloy. [In]: Sato T et al, eds. Proceed ing of the 6th International Conference on Aluminum Al loys, Toyohashi, The Japan Institute of Light Metals, 1998: 1021 ~ 1024.
  • 5JIANG D, KANG S B, KIM H W. Microstmcture and mechanical properties of Al - Mg alloy sheets for auto body application [J], Mater. Sci. & Techno. , 15,1999: 1401.

同被引文献75

  • 1郭旭涛,李培杰,熊玉华,刘树勋,曾大本.稀土在铝、镁合金中的应用[J].材料工程,2004,32(8):60-64. 被引量:36
  • 2苏婕,肖于德,黎文献,吴永玉.锆和稀土元素细化Al-Mg合金铸态组织的机理探讨[J].材料与冶金学报,2005,4(1):55-59. 被引量:17
  • 3杨长贺,孙军,高洪吾.旋转喷头法对铝液的高效除氢作用[J].特种铸造及有色合金,1995,15(3):6-7. 被引量:6
  • 4胥锴,刘政,刘萍.稀土在铝及铝合金中的应用现状与展望[J].有色金属加工,2005,34(5):10-14. 被引量:19
  • 5陈策 宋德周.国外现代铝带冷轧机和国产先进冷轧机[A].北京:文集编辑委员会.铝加工高新技术文集[C].,2001.186-187.
  • 6Martin B Taylor, Mart Czssetee and Eli Duke. Recent Experience with the Alcan Compact Degasser in Two Plants[A].Light Metals[C].2000.779-784.
  • 7Martin Syvertsen, Frede Frisvold Thorvald, Abel Engh and Didrik S. Voss. Development of a Compact Deep Filter for Aluminium[ A]. Light Metals[C]. 1999. 1049 - 1055.
  • 8Michael Miniedzinski, Dawid D Smith, Leonard S Aubrey, Edwad M Williams. Staged Filtration Evaluation at an Aircraft Plate and Sheet Manufacturer[A]. Light Metals[C]. 1999. 1019- 1030.
  • 9Gary Parher,Tabb WillIams and Jennifer Black. Production Scale Evaluation of a New Design Geramic Foam Filter[A]. Light Metals[C]. 1999. 1057 - 1062.
  • 10A Tronche and A L Greer. Design of Grain Refiners for Aluminium Alloys[ A]. Light Metals [C]. 2000.827 - 832.

引证文献3

二级引证文献61

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部