摘要
通过高分辨率三维地震剖面的解释 ,并结合开发井的层位校正 ,确定了大庆长垣南部太 190油田中微幅度构造的基本特征。该区广泛存在的微幅度构造控制着油田注水开发效果及剩余油的分布。重力作用是影响油田注水开发效果的主要原因 ,由油水重力分异而产生的浮力是油田注水开发过程中可以利用的一种驱动力。试验结果表明 ,利用浮力使剩余油在短距离内短时间再聚集是可行的 ,因而在砂体窄小、微幅度构造发育的复杂断块油藏 ,利用浮力采油是一种有效的改善油田注水开发效果的方法。在井网加密调整的过程中 ,油井应布在微幅度构造的高点及斜坡部位 ,这样可以利用浮力 ,采用油水井间抽、间注的方式有效地开采剩余油。图 1表 1参
Based on the basic structural characters of T oil field in south part of Daqing placanticline determined by high-resolution 3-D seismic profile data, this paper proposes that the micro-relief structures control the remaining oil distribution and the results of water injection in the oil field. It is because of gravity that the micro-relief structures affect the water injection results. The buoyancy out of oil and water gravity segregation is the new drive force to be used in water flooding. Showed from the results of the experiment, it is feasible for the buoyancy to re-gather the remaining oil for a short time in near distance. So with the intermittent injection and production of wells during recovering the remaining oil, to use buoyancy is a good method for improving development results of the complex fault-block reservoir with small and narrow sand bodies and micro-relief structures.
出处
《石油勘探与开发》
SCIE
EI
CAS
CSCD
北大核心
2003年第1期65-67,共3页
Petroleum Exploration and Development
关键词
微幅度构造
识别方法
高含水后期
剩余油分布
浮力采油
大庆长垣
micro-relief structure
recognition method
late period of high water cut stage
remaining oil distribution
buoyancy drive
Daqing placanticline