基于B/S架构的空气源热泵远程控制系统的界面设计研究

Research on Interface Design of Air Source Heat Pump Remote Control System Based on B/S Architecture

随着人们生活质量的不断提高,人们对热水的需求也已经成为不可或缺的一部分。长期以来,热水都是由传统的热水器来进行供给的,但由于传统热水器的耗能较高、成本较大,使传统热水器逐渐被空气源热泵所取代,空气源热泵具备环保节能的应用优势,如今在人们的生活当中经常可以见到。本文通过对基于B/S架构的空气源热泵远程控制系统的体系架构进行简要的介绍,明确了系统界面设计中所采用的关键技术,在此基础上对远程控制系统的界面设计进行了研究,希望能为设计人员在进行空气源热泵远程控制系统的界面设计时提供指导作用。

With the continuous improvement of people's quality of life, people's demand for hot water has become an indispensable part. For a long time, hot water is supplied by traditional water heaters. However, because of the high energy consumption and high cost of the traditional water heater, the traditional water heater is gradually replaced by the air-source heat pump, and the air-source heat pump has the advantage of environmental protection and energy saving. This paper introduces the architecture of air source heat pump remote control system based on B/S architecture. The key technologies used in the interface design of the system are defined, and the interface design of the remote control system is studied on this basis. This paper hopes to provide guidance for designers in the interface design of air source heat pump remote control system.