摘要
通过UG软件建立WYD390液压挖掘机工作装置的虚拟样机,并利用ADAMS软件对WYD390虚拟样机的工作包络区域和常用工作包络区域进行了分析,得出了两种情况下的包络线,并进一步得出了其最大挖掘半径,最小挖掘半径,最大挖掘高度等参数,为以后本产品的改进和类似产品的开发设计提供了参考。
Establish WYD390 hydraulic excavator virtual prototype is established by UG software ,and WYD390 envelope virtual prototype work area and common work areas were analyzed by using ADAMS software ,then work areas are obtained ,and those are further obtained maximum digging radius ,the minimum radius of excavation ,the maximum digging height and other parameters . So it provide a reference for the future of this product and similar products development and design .
出处
《机械管理开发》
2014年第5期46-48,共3页
Mechanical Management and Development
关键词
液压挖掘机
工作装置
包络线
虚拟样机
hydraulic excavator
working device
work areas
virtual prototyping
