摘要
基于接触强度计算方法,计算出了齿轮沿齿面深度方向的剪切应力分布,通过剪切应力与剪切强度的关系,得到了渗碳齿轮最低要求的硬度分布曲线,在此基础上,设计出了齿轮硬化层硬度分布,得到有效硬化层深度。
Based on the calculating method of contact strength , the shear stress distribution along the depth direction of gear surface was calculated, from the relationship of shear stress and shear strength , the lowest hardness distribution curve for carburized gear was obtained . Based on the lowest hardness distribution curve , the hardness distribution for carburized gears was designed , and the available hardened depth of carburized gears was obtained .
出处
《金属热处理》
CAS
CSCD
北大核心
2014年第6期147-150,共4页
Heat Treatment of Metals
基金
国家科技支撑计划(2013BAF01B05
2013BAF01B04)
郑州市科技攻关项目(121PZDGG255)
关键词
齿轮
渗碳层深度
剪切应力
硬度分布
gear
carburized case depth
shear stress
hardness distribution