期刊文献+

含硼SCSiMn2H铸钢的淬透性预测 被引量:1

Hardenability prediction of SCSiMn2H cast steel with boron
原文传递
导出
摘要 通过对含硼SCSi Mn2H铸钢进行淬透性末端淬火试验,研究了化学成分对淬透性的影响,得到可用于淬透性预测的回归方程。试验结果显示,与其他预测方法比较,回归方程的预测效果更好,为及时准确预测含硼SCSi Mn2H铸钢淬透性提供了新的途径。 Influence of chemical composition on hardenability of SCSiMn 2H cast steel with boron was investigated through Jominy end quench tests and the regression equations for predicting the hardenability were obtained .The results show that the prediction using regression equations for SCSiMn2H cast steel with boron is preferable compared with the other methods , thus a new feasible method for accurately predicting the hardenability of SCSiMn2H cast steel with boron is offered .
出处 《金属热处理》 CAS CSCD 北大核心 2014年第11期125-127,共3页 Heat Treatment of Metals
关键词 SCSI Mn2H含B铸钢 淬透性预测 化学成分 回归分析 SCSi Mn2H cast steel with boron hardenability prediction chemical composition regression analysis
  • 相关文献

参考文献5

二级参考文献22

  • 1宋月鹏,刘国权,刘胜新,刘建涛,王延龙,李少峰.中碳合金结构钢端淬曲线的非线性方程法模拟[J].材料热处理学报,2004,25(4):85-88. 被引量:9
  • 2SONG Yue-peng,LIU Guo-quan,LIU Sheng-xin,LIU Jian-tao,FENG Cheng-ming.Improved Nonlinear Equation Method for Numerical Prediction of Jominy End-Quench Curves[J].Journal of Iron and Steel Research International,2007,14(1):37-41. 被引量:7
  • 3余柏海.计算淬透性及机械性能的非线性方程[J].钢铁,1985,20(3):41-49.
  • 4GB/T225-88.结构钢末端淬透性试验法[S].1988.
  • 5ASTM A255-88. Standard Method for End-Quench Test for Hardenability of Steel[S]. 1988.
  • 6GB/T5216-2004.保证淬透性结构钢[S].2004.
  • 71982 Annual Book of ASTM Standards. Part 5. Steel Bars,Chain,and Springs; Bearing Steel; Steel Forgings[ S]. 1982.
  • 8Erwin Just. New formulas for calculating hardenability curves[ J~. Metal Process, 1969,96( 11 ) : 87 -95.
  • 9Vermeulen W G, Vander Wolk P J, Deweijer A P, et al. Prediction Of jominy hardness profiles of steels using artificial neural networks [J]. Mater Eng Performance, 1996,5 ( 1 ) :57 - 63.
  • 10SONG Yue-peng, ZHANG Xiao, LIU Guo-quan. Computer-aided optimized design for multi-alloyed steels specifying hardenability requirements[ J]. Key Material Science,2007, (4) :3112 - 3115.

共引文献21

同被引文献19

  • 1任清学,蔡燮鳌.窄淬透性高级齿轮钢研发[J].现代冶金,2013,41(5):3-5. 被引量:2
  • 2宋月鹏,刘国权,刘胜新,刘建涛,王延龙,李少峰.中碳合金结构钢端淬曲线的非线性方程法模拟[J].材料热处理学报,2004,25(4):85-88. 被引量:9
  • 3金满,连建设,江中浩.结构钢端淬曲线预测新方法[J].金属学报,2006,42(4):405-410. 被引量:12
  • 4殷瑞钰.钢的质量现代进展[M].北京:冶金工业出版社,1995..
  • 5Grossmann M A. Hardenability Calculated from Chemical Compositions [J]. AIME Transactions, 1942, 150(227) : 6.
  • 6ASTM A255-10. Standard test methods for determining hardenability of steel[ S 1.
  • 7Just E. New formulas for calculating hardenability curves [ J I. Metal Progress, 1969, 96(5) : 87-88.
  • 8Breen D H, Walter G H, Keith C J, et al. Computer-based system selects optimum cost steels [ J 1- Metal Progress, 1973, 104 : 43-43.
  • 9Dobrzanski L A, Sitek W. Application of a neural network in modelling of hardenability of constructional steels [ J ]. Journal of Materials Processing Technology, 1998, 75( 1 ) : 59-66.
  • 10Mostert R J, Van Rooyen G T. Novel model for accurate calculation of hardenability and continuous cooling transformation [ J ]. Materials Science and Technology, 1991, 7(9) : 803-811.

引证文献1

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部