摘要
用正交试验的方法 ,对铍青铜形变时效工艺进行了优选。试验表明 ,控制冷变形度、时效温度和时效时间 ,可获得高的硬度 ,优化后的铍青铜形变时效工艺为 :37%冷变形 + 2 90℃× 2h。
The optimum selection of deformation aging process of beryllium bronze was tested with orthogonal experimentation.The results show that treated with a suitable extent of cold deformation,aging temperature and aging time,the beryllium bronze could gain high hardness.The optimum deformation aging process of the beryllium bronze were given which is 37% of cold deformation then aging at 290℃ for 2h.
出处
《金属热处理》
CAS
CSCD
北大核心
2003年第2期63-64,69,共3页
Heat Treatment of Metals
关键词
铍青铜
形变
时效
正交试验
工艺优化
beryllium bronze
deformation
aging
orthogonal experimentation